Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 250

Code: SC120

Description: Scanner home position error 1
The scanner home position sensor does not detect the off condition during initialization or copying.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • IOSCC board defective • Scanner home position sensor harness defective

Code: SC121

Description: Scanner home position error 2
The scanner home position sensor does not detect the on condition during initialization or copying.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • IOCSS board defective • Scanner home position sensor harness defective bq

Code: SC122

Description: Scanner home position error 3
The scanner home position sensor detects the on condition while the scanner is returning to the home position.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • IOCSS board defective • Scanner home position sensor harness defective bq

Code: SC123

Description: Scanner home position error 4
The scanner home position sensor does not detect the on condition after the scanner returns to the home position.
Causes: • Scanner home position sensor defective • Scanner drive motor defective • IOCSS board defective • Scanner home position senor harness defective

Code: SC192

Description: Automatic SBU adjustment error
An error is detected during automatic SBU adjustment.
Causes: • SBU defective • BiCU board defective • Lamp regulator defective • Exposure lamp deective • Dirty white plateM

Code: SC302

Description: Charge roller current leak
A charge roller current leak signal is detected.
Causes: • Charge roller damaged • Charge high voltage supply board defective • Poor connection of the PCU

Code: SC306

Description: Charge roller home position error
The charge roller contact sensor does not detect the on condition.
Causes: • Charge roller contact sensor defective • Charge roller contact clutch defective

Code: SC320

Description: Polygon motor error
The polygon motor does not reach its operating speed within 10 seconds after the polygon motor on signal, or the lock signal is not detected for more than 40 ms continuously during operation.
Causes: • Polygon motor defective • Poor connection of the interface harness which connects the polygon motor driver and the IOCSS board • IOCSS board defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie