Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 3232C — Trang 10/17

Code: 725

Description: Finisher stack feed-out motor error (1000-sheet finisher)
The stack feed-out motor jam is detected consecutively twice after the stack feed-out motor turned on.
Causes: • Stack feed-out HP sensor defective • Stack feed-out motor defective • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation

Code: 726

Description: Finisher tray lift motor error (1000-sheet finisher)/ Finisher output tray motor error (500-sheet finisher)
• The tray lift motor jam is detected consecutively twice after the tray lift motor turned on (1000-sheet finisher). • The output tray motor lock signal is detected for 10 seconds after the output tray motor turned on (500sheet finisher).
Causes: • Tray lift motor or output tray motor defective • Stack height sensor defective • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation

Code: 727

Description: Finisher stapler motor error (500-sheet finisher)
Stapling does not finish within a certain time after the stapler motor turned on.
Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Stapler motor defective • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation

Code: 728

Description: Finisher paper stack height error (500-sheet finisher)
The stack height detection lever does not return to its home position before going to detect the stack height.
Causes: • Stack height lever solenoid defective • Stack height sensor defective • Lever sensor defective • Main control board defective • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation

Code: 730

Description: Finisher stapler motor error (1000-sheet finisher)
The stapler motor jam is detected consecutively twice after the staple motor turned on.
Causes: • Stapler motor defective • Stapler HP sensor defective • Poor stapler motor connection • Defective finisher control board • Defective board • Defective BICU • Defective IOB • Incorrect installation

Code: 731

Description: • Output tray motor error (500-sheet finisher) • Exit guide plate motor error (1000-sheet finisher)
• The tray upper limit sensor does not activate within a certain time after the tray motor turned on (500sheet finisher). • The exit guide plate motor jam is detected consecutively twice after the exit guide plate motor turned on (1000-sheet finisher).
Causes: • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation 500-sheet finisher • Output tray motor defective • Tray upper limit sensor defective 1000-sheet finisher • Exit guide plate motor defective • Exit guide plate HP sensor defective

Code: 732

Description: Finisher shift motor error (1000-sheet finisher)
The shift motor jam is detected consecutively twice after the shift motor turned on.
Causes: • Shift motor defective • Shift HP sensor defective • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation

Code: 740

Description: Finisher communication error
• A connection error occurs. • The UART reports a communication error. • In cases other than paper transport, after an every-3-second command is sent, the finisher does not respond within 5 seconds.
Causes: • Defective finisher control board • Defective BICU • Defective IOB • Incorrect installation
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie