Description: Warm-up time over (pressure roller)
The main switch is turned on or a cover is closed. The fusing pressure roller does not reach the ready temperature within 200 seconds.
Description: Full power error (pressure roller)
Fusing unit warm-up is complete. The fusing pressure roller stops turning. The pressure roller lamp keeps outputting the maximum power for 150 seconds.
Description: Unstable temperature (pressure roller)
The pressure roller thermistor detects unstable temperature increases or decreases within 60 seconds.
Description: Zero cross over error
The main switch is turned on; the fusing relay turns on. The detected zero cross is out of the target range (less than 45 or more than 65). The zero cross is detected more than 65 in ten cases out of eleven zero cross detections.
Description: Fusing oil overflow
• The oil overflow sensor detects oil. • When the machine covers are closed, the oil supply unit is not detected. • When the machine covers are closed, the fusing unit is not detected.
Causes: • Defective oil end sensor • Defective oil overflow sensor • Defective sensor cable • Oil supply unit not installed
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.