Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 3245C — Trang 13/20

Code: 744

Description: Booklet finisher rear jogger fence motor error
• The rear-jogger-fence home-position sensor does not turn off within 3 seconds after the rear-jogger-fence motor starts. • The rear-jogger-fence home-position sensor does not turn on within 3 seconds when the rear-jogger-fence motor is driving the fence to its home position.
Causes: • Incorrect assembling of the rear jogger fence • Loose connection of the rear jogger fence motor • Defective rear-joggerfence home-position sensor • Loose connection of the rear-jogger-fence home-position sensor

Code: 745

Description: Booklet finisher stack-tray exit motor error
• The stack-tray-belt home-position sensor does not turn off within 394 milliseconds after the stack-tray exit roller starts to drive the belts. → The stack-tray exit motor retries to drive the belts, but the stack-traybelt home-position sensor still does not turn off within another 394 milliseconds. • The stack-tray-belt home-position sensor does not turn on within 1,084 milliseconds after the same home-position sensor turns off. → The stack-tray exit motor retires to drive the belts, but the stack-tray belt home-position sensor still does not turn on within another 1,084 milliseconds.
Causes: • Defective stack-tray exit motor • Loose connection of the stack-tray exit motor • Defective stack-traybelt home-position sensor • Loose connection of the stack-tray-belt home-position sensor

Code: 746

Description: Booklet finisher stapler/folder motor error
• The stapler/folder motor starts. However, the controller does not receive the signal from the encoder sensor within 0.1 second. • The stapler/folder motor starts to drive the stapler unit, and the stapler switch is on. However, the controller does not receive the signal from the home position sensor for 0.5 second. • The stapler starts to staple the paper. However, the controller does not receive any signal from the home position sensor, and the stapler switch is off. • The stapler/folder motor starts to drive the folder rollers. However, the home position sensor does not turn off within 9.247 seconds. • The home position sensor does not turn on within 9.247 seconds after this same sensor turns off.
Causes: • Malfunction of the stapler/folder motor • Loose connection of the stapler/folder motor • Loose connection of the encoder sensor • Defective encoder sensor • Loose connection of the stapler switch • Defective stapler switch • Loose connection of the stapler home position sensor • Defective stapler home position sensor • Loose connection of the folder-roller home-position sensor • Defective folder-roller home-position sensor

Code: 747

Description: Booklet finisher lift motor error
• The upper limit sensor detects the regular tray while the lift motor is lifting the regular tray. • The paper height sensor does not turn off within 10 seconds after the lift motor starts to lower the regular tray. • The upper limit sensor does not turn off within 10 seconds after the lift motor starts to lower the regular tray. • The paper height sensor does not turn on within 10 seconds after the lift motor starts to lift the regular tray. • The controller does not receive the signal from the lift motor encoder sensor within 50 milliseconds after the lift motor starts.
Causes: • Defective paper height sensor • Loose connection of the paper height sensor • Defective upper limit sensor • Loose connection of the upper limit sensor • Defective lift motor • Loose connection of the lift motor • Incorrect assembling of the lift motor • Defective lift motor encoder sensor • Loose connection of the lift motor encoder sensor

Code: 748

Description: Booklet finisher backup data error
The CPU tries to write data in the EEPROM three times, but fails to write data.
Causes: • Defective EEPROM • EEPROM not installed

Code: 749

Description: Booklet finisher punch-unit communication error
A communication-error alarm is not cleared for 3 seconds.
Causes: • The finisher controller cannot communicate with the punch-unit controller.

Code: 750

Description: Booklet finisher punch-unit controller error
The checksum in the backup data is inconsistent.
Causes: • Defective EEPROM (on the punch-unit controller) • EEPROM not installed

Code: 751

Description: Booklet finisher punch-unit sensor error 1
The paper edge and size sensors receive the 2.5-volt light or weaker light even when the source emits 4.4-volt light.
Causes: • Defective sensors • Dirty sensors
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie