Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 3245C — Trang 11/20

Code: 701

Description: ARDF original pick-up/paper lift mechanism malfunction
• The original pick-up HP sensor is not activated after the pick-up motor is turned on.
Causes: • Original pick-up HP sensor defective • Pick-up motor defective • ARDF main board defective

Code: 722

Description: Two-tray finisher jogger motor error
• The jogger fences of the two-tray finisher donot return to home position within a specific time. • The two-tray finisher jogger motor does not leave home position within a given time.
Causes: • Defective jogger H.P. sensor • Loose connection • Defective jogger motor

Code: 724

Description: Two-tray finisher staple hammer motor error
Stapling does not finish within 150 ms after the staple hammer motor turns on.
Causes: • Staple jam • Loose connection • Overload caused by stapling too many pages • Defective staple hammer motor

Code: 725

Description: Two-tray finisher stack feed-out motor error
The stack feed-out belt H.P. sensor does not activate within a specified time after the stack feed-out motor turns on.
Causes: • Defective stack feed-out H.P. sensor • Loose connection • Stack feed-out motor overload • Defective stack feed-out motor

Code: 726

Description: Two-tray finisher shift tray 1 lift motor error
• The upper stack height 1 sensor is activated consecutively (detecting paper) for 15 seconds after the shift tray starts moving up. • The upper stack height sensor 1 is deactivated consecutively (not detecting paper) for 15 seconds after the shift tray starts moving down. • When the upper tray moves from lower paper exit to the upper paper exit, the upper stack height 1 sensor is activated.
Causes: • Loose connection • Defective upper stack height 1 sensor • Defective shift tray 1 lift motor • Motor overload

Code: 727

Description: Two-tray finisher stapler rotation motor error
The stapler cannot return to its home position within a specified time after the stapler rotation motor starts rotating.
Causes: • Loose connection • Defective stapler rotation motor • Motor overload

Code: 729

Description: Two-tray finisher punch motor error
The punch home position is not detected within 250 ms after the punch clutch turns on.
Causes: • Loose connection • Defective punch H.P. sensor • Defective punch clutch • Defective punch hole motor

Code: 730

Description: Two-tray finisher stapler motor error
The stapler home position is not detected within a specified time after the staple motor turns on.
Causes: • Loose connection • Defective stapler H.P. sensor • Defective stapler motor
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie