Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 455 — Trang 5/11

Code: SC493

Description: Bridge unit cooling fan lock
A bridge unit cooling fan motor lock signal is not detected within 5 seconds after the bridge unit cooling fan motor turns on.
Causes: • Too much load on the drive mechanism • Bridge unit cooling fan motor defective • Poor fan motor connector connection

Code: SC501-1

Description: 1st tray lift malfunction 1
The paper upper limit sensor is not activated after the tray lift motor has been on for 10 seconds.
Causes: • 1st tray upper limit sensor defective • Tray lift motor defective • Too much paper in the tray

Code: SC501-2

Description: 1st tray lift malfunction 2
If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within 5 seconds after the paper bottom plate starts to drop. If it does not deactivate within 5 s four times consecutively, this SC will be generated.
Causes: • 2nd tray upper limit sensor defective • Tray lift motor defective • Poor tray lift motor connection

Code: SC502-1

Description: 2nd tray lift malfunction 1
The paper upper limit sensor is not activated after the tray lift motor has been on for 10 seconds.
Causes:

Code: SC502-2

Description: 2nd tray lift malfunction 2
If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within 5 seconds after the paper bottom plate starts to drop. If it does not deactivate within 5 s four times consecutively, this SC will be generated.
Causes: • 2nd tray upper limit sensor defective • Tray lift motor defective • Too much paper in the tray

Code: SC503-1

Description: 3rd tray lift malfunction 1 (optional paper tray unit)
The paper upper limit sensor is not activated after the tray lift motor has been on for 13 seconds.
Causes: • 3rd tray upper limit sensor defective • Tray lift motor defective • Poor tray lift motor connection

Code: SC503-2

Description: 3rd tray lift malfunction 2 (optional paper tray unit)
If the main power switch is turned on when the paper is already at the feed height, the paper height position is detected again. At this time, the paper upper limit sensor should de-activate within 5 seconds after the paper bottom plate starts to drop. If it does not deactivate within 5 s four times consecutively, this SC will be generated.
Causes: • 3rd tray upper limit sensor defective • Tray lift motor defective • Too much paper in the tray

Code: SC504-1

Description: 4th tray lift malfunction 1 (optional paper tray unit)
The paper upper limit sensor is not activated after the tray lift motor has been on for 13 seconds.
Causes: • 4th tray upper limit sensor defective • Tray lift motor defective • Poor tray lift motor connection
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie