• Code: SC964
• Description: Printer ready error
  The print ready signal is not generated for more than 17 seconds after the IPU received the print start signal.
• Causes: • Software defective

• Code: SC980
• Description: HDD access error
  Incorrect parameter sent from the BICU to the MSU.
• Causes: • Software defective • Poor connection between BICU and MSU.

• Code: SC981
• Description: HDD response error
  The HDD control board does not generate any response when the IPU sends a read/write signal to the MSU.
• Causes: • Software defective • Poor connection between BICU and MSU • HDD defective

• Code: SC982
• Description: HDD construction error
  1) The HDD has been installed without the electric sort kit (SIMM memory). 2) A HDD that does not have the correct specifications has been installed.
• Causes: • Hard disk defective • Incorrect hard disk type • The electric sort kit is not installed

• Code: SC990
• Description: Software performance error
  The software performs an unexpected function.
• Causes: • Software defective When this SC occurs, the file name, address, and data will be stored in the NVRAM. These data can be checked by entering SP mode then pressing “0”. Note the above data and the situation in which this SC occurs. Then report the data and conditions to your technical control centre.