Mã lỗi Ricoh Aficio 650 — Trang 6/7
Code:
Tất cả lỗi (52)
SC101
SC120
SC121
SC190
SC191
SC302
SC303
SC305
SC320
SC321
SC322
SC323
SC325
SC350
SC360
SC361
SC390
SC391
SC392
SC401
SC405
SC440
SC490
SC501
SC502
SC503
SC504
SC506
SC507
SC521
SC524
SC541
SC542
SC543
SC545
SC546
SC547
SC600
SC601
SC602
SC604
SC605
SC620
SC621
SC623
SC625
SC720
SC721
SC722
SC723
SC724
SC900
Description: Communication error between BCU and high voltage control board
The BCU board cannot communicate with the high voltage control board properly
Causes: • Poor connection of the interface harness which connects the BCU baord and the high voltage control baord. • High voltage control board defective
Description: Communication error between SCU and BCU
The SCU board cannot communicate with the BCU board properly.
Causes: • Poor connection • SCU board defective • BCU board defective
Description: Communication error between BCU and ARDF
The BCU board cannot start communication with the ARDF properly.
Causes: • Poor connection • BCU board defective • DF main board defective
Description: Communication error between BCU and finisher
The BCU board cannot start communication with the finisher properly.
Causes: • Poor connection • BCU board defective • Finisher main control board defective
Description: Communication error between BCU and paper tray unit
The BCU board cannot start communication with the paper tray unit properly.
Causes: • Poor connection • BCU board defective • Paper tray unit defective
Description: GA5 (GAFBTC) Error
The GA5 did not finish the data transfer to the memory in 20 seconds.
Causes:
Description: Finisher transport drive motor error
An abnormal motor condition is detected from the finisher transport drive motor.
Causes: • Finisher transport drive motor defective • Finisher main control board defective
Description: Finisher tray lift/shift motor error
An abnormal motor condition is detected from either the finisher tray lift or shift motor.
Causes: • Finisher tray lift motor defective • Finisher tray shift motor defective • Finisher main control board defective