Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio AP3200 — Trang 3/8

Code: 2501

Description: The data in the PS DIMM is damaged.
Causes: Replace the PS DIMM if this error is frequent.

Code: 2508

Description: The data in the IC card is damaged.
Causes: Reprogram the IC card and try again.

Code: 3002

Description: A damaged cluster was found on the HDD.
Causes: The damaged cluster is automatically marked as “bad”. If this error is frequent, format the HDD.

Code: 47xx

Description: Controller ASIC error.
Causes: Replace the controller.

Code: SC 696

Description: Communication error between the engine board and the finisher Definition: [B] The engine board cannot communicate with the finisher properly.
Causes: · Poor connection of the interface cable for the finisher · Finisher main board defective · Engine board defective

Code: SC 750

Description: Interchange unit connection error Definition: [B] The engine board cannot communicate with the interchange unit properly when the duplex unit is installed.
Causes: · Poor connection between the engine board and the interchange unit

Code: SC 751

Description: Bridge unit connection error Definition: [B] The engine board cannot communicate with the bridge unit properly when the finisher is installed.
Causes: · Poor connection between the engine board and the bridge unit

Code: SC 752

Description: Finisher connection error Definition: [B] The engine board cannot communicate with the finisher properly when the bridge unit is installed.
Causes: · Poor connection between the finisher and bridge unit
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie