Description: Polygon motor error The polygon motor does not reach its operating speed within 10 seconds after the polygon motor on signal, or the lock signal is not detected for more than a certain time during operation.
Description: 1st laser synchronization error The laser synchronization detector cannot detect the laser synchronization signal for more than 5 consecutive 100 ms intervals.
Causes: • Laser synchronization detector board out of position • Laser synchronization detector board or cable defective • Laser synchronization mirror out of position • LD unit defective • Engine board defective
Description: 2nd laser synchronization error The 1st LD1 is already on, but the laser synchronization detector cannot detect the laser synchronization signal from the 2nd LD for more than 5 consecutive 100 ms intervals.
Causes: • Laser synchronization detector board out of position • LD unit defective • Engine board defective
Description: Main motor lock A main motor lock signal is not detected for more than 700 ms after the main motor starts to rotate, or the lock signal is not detected for more than a certain time during rotation after the last signal.
Causes: • Main motor defective • Too much load on the drive mechanism
Description: Unstable fusing temperature During warm-up, the fusing temperature rises by less than 20 °C during 11 seconds. The fusing temperature detected by the thermistor was 0 °C 5 seconds after the fusing relay was turned on.
Causes: • Thermistor defective • Fusing lamp open • Fusing thermostat open • Power supply board defective • Defective connection of the fusing unit
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.