Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Color 2003 — Trang 2/12

Code: SC192

Description: Bar code number mismatch Type: 2 - Description - The SCU compares the bar code data read by the CCD and analyzed by the scanner IPU board with the machine identification number stored in the machine. If they do not match, the SCU determines that there is a bar code number mismatch. - Detection Timing - When the power switch is turned on
Causes: • SCU (System Control Unit) SP-Log: 7-402-1

Code: SC193

Description: IDU failure Type: 2 - Description - The IDU board diagnostics notify the scanner IPU board that it is faulty at power-on. Then the scanner IPU board notifies the SCU of this. - Detection Timing - When the power switch is turned on
Causes: • IDU SP-Log: 7-402-1

Code: SC196

Description: Extended IPU abnormal Type: 4 - Description - The extended IPU board diagnostics notify the scanner IPU board when its image processing ASIC on the extended IPU board is faulty at power-on. Then the scanner IPU board notifies the SCU of this. This check is not made if the extended IPU board is not installed. - Detection Timing - When the power switch is turned on
Causes: • Extended IPU SP-Log: 7-402-1

Code: SC197

Description: Extended IPU connection abnormal (A189 machine only) Type: 4 - Description - The SCU detects when the extended IPU is not connected. - Detection Timing - When the power switch is turned on
Causes: • Extended IPU • SCU (System Control Unit) SP-Log: 7-402-1

Code: SC301

Description: Charge current leak Type: 2 - Description - The main control board notifies the SCU that the charge current from the high-voltage power pack does not reach the target due to such causes as a leak or power pack failure. - Detection Timing - When the charge current is applied
Causes: • High voltage power supply • Leak locations SP-Log: 7-402-3

Code: SC320

Description: Polygon motor abnormal Type: 2 - Description - The main control board notifies the SCU when the polygon motor driver does not reach a defined number of rotations within a predetermined period of time. - Detection Timing - When starting the preparation for writing
Causes: • Polygon motor SP-Log: 7-402-3

Code: SC322

Description: Laser synchronizing signal error Type: 5 - Description - The main control board notifies the SCU when image transfer is aborted and the image transfer buffer (FIFO) on the printer main board is full or in an error condition. - Detection Timing - During the image transfer process
Causes: • Laser synchronizing detector board • Main control board • LD control board SP-Log: 7-402-3

Code: SC323

Description: LD drive current over (LD error) Type: 2 - Description - The main control board notifies the SCU of LD overcurrent. - Detection Timing - During LD writing
Causes: • LD control board SP-Log: 7-402-3
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie