Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Color 2203 — Trang 5/12

Code: SC441

Description: Drum motor abnormal Type: 2 - Description - The main control board notifies the SCU when the drum motor does not start up within a predetermined period of time or does not output the LOCK signal for more than a predetermined period of time during the rotation. - Detection Timing - During the rotation of the drum motor
Causes: • Drum motor • Main control board SP-Log: 7-402-4

Code: SC450

Description: Paper transfer charge abnormal Type: 2 - Description - The main control board notifies the SCU that the paper transfer charge output value from the high voltage power pack does not reach the target due to such causes as a leak or power pack failure. - Detection Timing - When the paper transfer charge is active
Causes: • High voltage power supply • Leak locations SP-Log: 7-402-4

Code: SC452

Description: Transfer belt H.P. not detected Type: 2 - Description - The main control board notifies the SCU that the belt H.P. sensor does not detect the belt mark (does not go on) while the transfer belt is moving at normal speed. - Detection Timing - During normal-speed rotation of the transfer belt
Causes: • Transfer belt H.P. sensor • Main control board SP-Log: 7-402-4

Code: SC453

Description: Transfer belt H.P. sensor abnormal - Stays on Type: 2 - Description - The main control board notifies the SCU that the belt H.P. sensor does not go off while the transfer belt is moving at normal speed. - Detection Timing - During normal-speed rotation of the transfer belt
Causes: • Transfer belt H.P. sensor • Main control board SP-Log: 7-402-4

Code: SC495

Description: Thermo sensor abnormal Type: 5 - Description - The voltage read by the thermosensor on I/O control board 1 is out of the specified range (between 0.2 V and 3.5 V) for a successive 30 times. - Detection Timing - When the power switch is turned on When the front cover is closed
Causes: • Thermosensor • Main control board SP-Log: 7-402-4

Code: SC496

Description: Humidity sensor abnormal Type: 5 - Description - The voltage read by the humidity sensor on I/O control board is out of the specified range (between 0.2 V and 3.5 V) for a successive 30 times. - Detection Timing - When the power switch is turned on When the front cover is closed
Causes: • Humidity sensor • Main control board SP-Log: 7-402-4

Code: SC501

Description: Tray upper limit sensor disabled (1st bank) Type: 4 - Description - The paper tray unit diagnostics notify the main control board when the 1st bank upper limit sensor does not operate. - Detection Timing - When the power switch is turned on When the paper tray unit operates
Causes: • Paper tray unit • Main control board SP-Log: 7-402-5

Code: SC502

Description: Tray upper limit sensor disabled (2nd bank) Type: 4 - Description - The paper tray unit diagnostics notify the main control board when the 2nd bank upper limit sensor does not operate. - Detection Timing - When the power switch is turned on When the paper tray unit operates
Causes: • Paper tray unit • Main control board SP-Log: 7-402-5
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie