Description: Pressure roller temperature does not increase Type: 1 - Description - The main control board notifies the SCU when the output of the pressure roller thermistor increases by no more than 3°C for a minute during warming up after the power switch is turned on. - Detection Timing - When the power switch is turned on
Causes: • Pressure roller thermistor • Main control board SP-Log: 7-402-5
Description: Zero cross signal abnormal Type: 1 - Description - The main control board notifies the SCU when the number of zero cross signals generated within a certain period of time does not reach a predetermined number. - Detection Timing - At all times
Description: Communication error between the SCU and operation panel boards Type: 3 - Description - The input value used by the SCU to send the test signal to the operation panel does not match the expected value. - Detection Timing - When the power switch is turned on When the operation panel is used
Causes: • SCU (System Control Unit) SP-Log: 7-402-6
Description: Communication error between SCU and scanner IPU boards Type: 3 - Description - The SCU detects a communication error in the scanner module during communication with the scanner IPU board based on the SCSI connection protocol. - Detection Timing - At all times
Description: Communication error between SCU and printer main control board Type: 3 - Description - The SCU detects a communication error in the printer module during communication with the main control board based on the SCSI connection protocol. - Detection Timing - Always
Causes: • Main control board • SCU (System Control Unit) • SCSI cable SP-Log: 7-402-6
Description: Communication error between scanner and IDU Type: 2 - Description - The scanner IPU board detects a communication error in the IDU during communication with the IDU based on the IDU connection protocol. - Detection Timing - When the power switch is turned on When the IDU is active
Description: Printer internal communication error Type: 2 - Description - (1) When the Fgate signal (LD on/off control) is not sent. (2) When the sequence reaches an impossible value. (3) When the Fgate OFF command is received for a process that has not started - Detection Timing - Always
Description: Printer SCSI communication error Type: 2 - Description - The main control board detects an error or hardware-related noise during communication between the SCU or SCN and the main control board. - Detection Timing - Always
Causes: • Main control board • SCU (System Control Unit) • Scanner IPU • SCSI cable SP-Log: 7-402-6
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.