Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP2510 — Trang 7/17

Code: 543

Description: Fusing overheat error 1
A fusing temperature over 230°C is detected for 5 second by the fusing thermistor.
Causes: • TRIAC short on PSU (PSU defective) • SBCU board defective • Fusing thermistor defective

Code: 544

Description: Fusing overheat error 2
• A fusing temperature over 250°C is detected by the fusing temperature monitor circuit in the SBCU board. • The power was interrupted for more than 0.3 sec.
Causes: • TRIAC short on PSU (PSU defective) • SBCU board defective • Fusing thermistor defective • Voltage of power supply unstable

Code: 545

Description: Fusing overheat error 3
After warmup, the hot roller attained full operating temperature and maintained this temperature for 10 sec. without the hot roller rotating.
Causes: • Hot roller thermistor is out of its position because of incorrect installation

Code: 546

Description: Unstable fusing temperature
The fusing temperature varies 50°C or more twice in succession within 1 sec.
Causes: • Thermistor disconnected or defective • Fusing unit drawer installed incorrectly

Code: 547

Description: Zero cross signal detection error
Zero cross signals are not detected within a certain period.
Causes: • PSU defective • SBCU board defective

Code: 548

Description: Fusing unit set error
The machine does not detect the fusing unit.
Causes: • Poor connection of the fusing unit • The fusing unit is not installed

Code: 557

Description: Zero cross waveform signal error
The waveform of the zero cross signal was detected out of range.
Causes: • Electrical noise on the power supply line

Code: 590

Description: Exhaust fan motor error
The CPU detects an exhaust fan lock signal for more than 3.5 seconds.
Causes: • Poor connection of the exhaust fan motor • Too much load on the motor drive
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie