• Code: SC794-02
• Description: Rear jogger motor error without 1-bin tray (D586) The machine does not detect a correct signal from the rear jogger fence HP sensor while the rear jogger motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Defective front jogger motor • Loosen connection • Motor overload • Defective front jogger fence HP sensor
• Remedy: • Reset the connector • Replace the front jogger fence HP sensor. • Replace the front jogger motor.

• Code: SC794-03
• Description: Pick-up roller contact motor error without 1-bin tray (D586) The machine does not detect a correct signal from the pick-up roller HP sensor while the pick-up roller contact motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Defective pick-up roller contact motor • Loosen connection • Motor overload • Defective pick-up roller HP sensor
• Remedy: • Reset the connector • Replace the pick-up roller HP sensor. • Replace the pick-up roller contact motor.

• Code: SC794-04
• Description: Exit guide plate motor error without 1-bin tray (D586) The machine does not detect a correct signal from the exit guide plate HP sensor while the exit guide plate motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Defective exit guide plate motor • Loosen connection • Motor overload • Defective exit guide plate HP sensor
• Remedy: • Reset the connector • Replace the exit guide plate HP sensor. • Replace the exit guide plate motor.

• Code: SC794-05
• Description: Output tray motor error without 1-bin tray (D586) The machine does not detect a correct signal from the stack height detection lever sensor while the output tray motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Defective output tray motor • Loosen connection • Motor overload • Defective stack height detection lever sensor
• Remedy: • Reset the connector • Replace the stack height detection lever sensor. • Replace the output tray motor.

• Code: SC794-06
• Description: Stack height detection lever motor error without 1-bin tray (D586) The machine does not detect a correct signal from the stack height detection lever HP sensor while the stack height detection lever motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Defective stack height detection lever motor • Loosen connection • Motor overload • Defective stack height detection lever HP sensor • Defective stack height detection lever sensor
• Remedy: • Reset the connector • Replace the stack height detection lever sensor. • Replace the output tray motor.

• Code: SC794-07
• Description: Punch drive motor error without 1-bin tray (D586) The machine does not detect a correct signal from the punch position sensor while the punch drive motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Defective punch drive motor • Loosen connection • Motor overload • Defective punch position sensor
• Remedy: • Reset the connector • Replace the punch position sensor. • Replace the punch drive motor.

• Code: SC794-08
• Description: Punch movement motor error without 1-bin tray (D586) The machine does not detect a correct signal from the punch position sensor while the punch movement motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Defective punch movement motor • Loosen connection • Motor overload • Defective punch position sensor
• Remedy: • Reset the connector • Replace the punch position sensor. • Replace the punch movement motor.

• Code: SC794-09
• Description: Paper position sensor unit motor error without 1-bin tray (D586) The machine does not detect a correct signal from the paper position detection unit HP sensor while paper position sensor unit motor is operating. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
• Causes: • Defective paper position sensor unit motor • Loosen connection • Motor overload • Defective paper position detection unit HP sensor
• Remedy: • Reset the connector • Replace the paper position detection unit HP sensor. • Replace the paper position sensor unit motor.