Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP3500 — Trang 12/18

Code: 818

Description: Watchdog error
The bus is being held by another device, or a CPU-device infinite loop has occurred. A module that the watchdog is monitoring has not closed properly at the conclusion of its task, or the module cannot continue processing.
Causes: • System program defective; switch off/on, or change the controller firmware if the problem cannot be solved • Controller board defective • Controller option malfunction

Code: 819

Description: Fatal kernel error
Due to a control error, a RAM overflow occurred during system processing. One of the following messages was displayed on the operation panel.
Causes: • System program defective • Controller board defective • Optional board defective • Replace controller firmware

Code: 820

Description: Self-Diagnostic Error: CPU
The central processing unit returned an error during the self-diagnostic test.
Causes: • Controller board defective • Software defective

Code: 821

Description: Self-diagnostic error 2: ASIC
The ASIC provides the central point for the control of bus arbitration for CPU access, for option bus and SDRAM access, for SDRAM refresh, and for management of the internal bus gate.
Causes: • ASIC (controller board defective)

Code: 822

Description: Self-diagnostic error 3: HDD
Causes: • HDD defective • HDD harness disconnected, defective • Controller board defective

Code: 823

Description: Self-diagnostic Error: NIC
The network interface board returned an error during the self-diagnostic test.
Causes: • Network interface board defective • Controller board defective

Code: 824

Description: Self-diagnostic error 4: NVRAM
NVRAM device does not exist, NVRAM device is damaged, NVRAM socket damaged
Causes: • NVRAM defective • Controller board defective • NVRAM backup battery exhausted • NVRAM socket damaged

Code: 826

Description: Self-diagnostic Error: NVRAM/Optional NVRAM
The NVRAM or optional NVRAM returned an error during the self-diagnostic test.
Causes: • Make sure NVRAM is seated correctly in its socket • Replace the NVRAM on the controller board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie