Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP4002SP — Trang 6/24

Code: 505-2

Description: 5th tray lift malfunction (optional LCT)
Both tray lift sensor and lower limit sensor are turned on at the same time when the main power is turned on or the right door is closed.
Causes: • Tray lift motor defective or disconnected • Tray lift sensor defective or disconnected • Lowe limit sensor defective or disconnected

Code: 530

Description: Fusing exhaust fan motor error
The IOB does not receive the lock signal for10 seconds after turning on the fusing exhaust fan.
Causes: • Defective fusing exhaust fan motor or connector disconnection • Defective IOB • Disconnected harness

Code: 531

Description: Exhaust fan motor error
The IOB does not receive the lock signal for 10 seconds after turning on the exhaust fan motor.
Causes: • Defective exhaust fan motor or connector disconnection. • Defective IOB • Disconnected harness

Code: 532

Description: Cooling fan motor error
The machine does not detect the fan motor lock signal for 10 seconds after turning on the cooling fan motor.
Causes: • Defective cooling fan motor or connector disconnection. • Disconnected harness • Defective IOB

Code: 533

Description: Paper exit cooling fan motor error
The machine does not detect the fan motor lock signal for 10 seconds after turning on the paper exit cooling fan motor.
Causes: • Defective paper exit cooling fan motor or connector disconnection. • Defective IOB • Disconnected harness

Code: 540

Description: Fusing motor error
The IOB does not receive the lock signal for 2 seconds after turning on the fusing motor.
Causes: • Motor overload • Defective fusing motor or connector disconnection. • Defective IOB • Disconnected harness

Code: 541

Description: Fusing thermistor open (center)
The thermistor (center) detects 0°C or less for 5 sec.
Causes: • Fusing thermistor disconnected • Fusing thermistor connector defective

Code: 542

Description: Fusing temperature warm-up error(center)
This SC is generated if the following condition occurs:
• The thermistor (center) does not detect an 8°C increment in the fusing temperature for 7.5 sec. just after the fusing temperature reached 45 °C.
• The temperature of the center thermistor does not reach the target temperature for 28 seconds after the fusing lamps turned on.
Causes: • Thermistor warped or broken
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie