Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP401SPF — Trang 15/35

Code: SC829-00

Description: Self-diagnostic error: Optional RAM [XXXX]: Detailed error code
Causes: Self-diagnostic error: Optional RAM
Remedy: [0301] [0401] Verification error (Optional RAM slot ) Error detected during a write/verify check for the optional RAM (SDRAM DIMM). • Loose connection • Defective SDRAM DIMM • Defective controller • Turn the main power switch off and on. • Replace the SDRAM DIMM. • Replace the controller. [0302] [0402] Memory structure data error (Optional RAM slot ) The memory structure data error for the optional RAM (SDRAM DIMM) is detected during self-diagnosis. • Defective RAM DIMM • Defective SPD ROM on RAM DIMM • Defective 12C bus Replace the RAM DIMM.

Code: SC835-00

Description: Self-diagnostic error: Standard SDRAM DIMM [XXXX]: Detailed error code
Causes: Self-diagnostic error: Standard SDRAM DIMM
Remedy: [1102] The loopback connector is connected but check results is an error. • IEEE1284 connector error • Centronic loopback connector defective Replace the controller board. [110C] The loopback connector is connected but check results is an error. • ASIC device error • IEEE1284 connector error • Centronic loopback connector is defective Replace the controller board. [1120] Centronic loopback connector is not connected for detailed selfdiagnostic test. • Centronic loopback connector not connected correctly • Centronic loopback connector is defective • ASIC device is defective Replace the controller board.

Code: SC838-00

Description: Self-diagnostic Error: Clock Generator [XXXX]: Detailed error code
Causes: [2701] A verify error occurred when setting data was read from the clock generator via the I2C bus. • Defective clock generator • Defective I2C bus • Defective I2C port on the CPU
Remedy: Replace the controller board.

Code: SC839-00

Description: Self-diagnostic Error: Serial Flash [XXXX]: Detailed error code
Causes: [9001] USB NAND Flash ROM cannot be read.
Remedy: Defective controller board

Code: SC840-00

Description: EEPROM access error
Causes: While executing I/O to the EEPROM, an error is detected: • When a read error still occurs even after three attempts; • When a write error has occurred.
Remedy: EEPROM is defective or has reached its end of life.

Code: SC841-00

Description: Error in data read from the EEPROM
Causes: When mirrored data read from three different regions in the EEPROM differ each other. For some reason, the data stored in a particular region of the EEPROM has been overwritten.
Remedy:

Code: SC842-00

Description: Verification error in the NAND-Flash update
Causes: When updating the remote ROM and the ROM, SCS encountered an error in writing to the NAND-Flash memory that holds the module data. Defective NAND-Flash memory.
Remedy: Turn the main power switch off and on.

Code: SC842-01

Description: Verification error during NAND-Flash update
Causes: When starting-up the machine or re-stating it from the energy saving, the machine reads the state of the NAND-Flash and detects that there are defective blocks whose amount exceeds the threshold. This means that the life of the NAND-Flash is near-end. Near-end Life of NAND-Flash
Remedy: Replace the controller board as soon as possible.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie