Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP6000SP — Trang 23/25

Code: 874

Description: Delete All error 1: HDD
A data error was detected for the HDD/NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card.
Causes: • Turn the main switch off/on and try the operation again.
• Install the Data Overwrite Security Unit again. For more, see section “1. Installation”.
• HDD defective

Code: 875

Description: Delete All error 2: Data area
An error occurred while the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card.
Causes: • Turn the main switch off/on and try the operation again.

Code: 880

Description: File Format Converter (MLB) error
A request to get access to the MLB was not answered within the specified time.
Causes: • MLB defective, replace the MLB

Code: 900

Description: Electrical total counter error
The total counter contains something that is not a number.
Causes: • NVRAM incorrect type
• NVRAM defective
• NVRAM data scrambled
• Unexpected error from external source

Code: 901

Description: Mechanical total counter error
The mechanical counter is not connected.
Causes: • Mechanical total counter defective
• Mechanical total counter connector not connected

Code: 910 ... 914

Description: External Controller Error
The external controller alerted the machine about an error.
Causes: • Please refer to the instructions for the external controller.

Code: 919

Description: External Controller Error 6
While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, or BREAK signal from the other station was detected.
Causes: • Power outage at the EFI controller
• EFI controller was rebooted
• Connection to EFI controller loo

Code: 920

Description: Printer error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective; turn the machine off/on, or change the controller firmware
• Insufficient memory
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie