Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP7000SP — Trang 16/25

Code: 742

Description: Finisher stapler movement motor error B246
The stapler HP sensor is not activated within the specified time after the stapler motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Stapler movement motor disconnected, defective
• Stapler movement motor overloaded due to bstruction
• Stapler HP sensor disconnected, defective

Code: 743

Description: Finisher shift motor errors B140
For the optional jogger unit for the B706 finisher: During the return operation, the shift jogger motor or shift jogger fence lift motor did not return to the home position within the set number of pulses
Causes: • HP sensor of shift jogger motor, harness, connector defective, or motor disconnected
• HP sensor, harness, connector of retraction motor defective, or motor disconnected
• Shift jogger motor defective
• Shift jogger fence lift motor defective
• Finisher main control board defective

Code: 743

Description: Booklet stapler motor error 1 B246
The front stapler unit saddle-stitch motor does not start operation within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Front motor disconnected, defective
• Front motor overloaded due to obstruction

Code: 744

Description: Booklet stapler motor error 2 B246
The rear stapler unit saddle-stitch motor does not start operation within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Rear motor disconnected, defective
• Rear motor overloaded due to obstruction

Code: 750

Description: Cover interposer bottom plate motor error B140
• The bottom plate motor turns on to raise the bottom plate but the plate position sensor does not detect the plate within 3 s.
• The bottom plate motor reverses to lower the bottom plate but the bottom plate HP sensor does not detect the plate within 3 s.
Causes: • Bottom plate position sensor defective
• Bottom plate HP sensor defective
• Bottom plate motor defective
• Cover sheet feeder main board defective
• Harnesses disconnected, defective

Code: 750

Description: Finisher tray 1 (upper tray lift) motor error B246
The upper tray paper height sensor does not change its status with the specified time after the tray raises or lowers. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Tray lift motor disconnected, defective • Upper tray paper height sensor disconnected, defective
• Finisher main board connection to motor loose
• Finisher main board defective

Code: 753

Description: Z-Folding unit error 3 B140
The HP sensor of the upper stopper motor does not go off after the stopper moved 128.7 mm.
Causes: • Upper stopper motor defective
• Upper stopper motor disconnected, connector defective
• Upper stopper motor HP sensor disconnected, defective
• Z-Fold main control board defective

Code: 753

Description: Return roller motor error B246
Occurs during the operation of the lower tray pressure motor.
Causes: • Motor harness disconnected, loose, defective
• Motor overloaded
• Home position sensor harness disconnected, loose, defective
• Home position defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie