Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP9000 — Trang 2/25

Code: SC128

Description: Scanner Motor Error 4
The scanner motor speed does not reach the target speed by the time the scanning start point is reached.
Causes: • Scanner motor defective
• Overload on scanner mechanism • PSU-Eb board defective
• MCU board defective (scanner motor control unit)

Code: SC129

Description: Scanner Motor Error 5
The scanner motor speed is abnormal. The machine will not stop scanning even after the machine detects that motor speed is abnormal.
Causes: • Scanner motor defective
• Scanner drive mechanism defective
• PSU-Eb board defective
• MCU board defective (scanner motor control unit)

Code: SC141

Description: Black level detection error
When the scanner was turned on, AGC (automatic gain control) failed to achieve the target value of 10 ±3.
Causes: • SBUÅÆ IPU harnesses defective
• BCU ÅÆ IPU harnesses defective
• SBU defective
• IPU defective
• BCU defective

Code: SC142

Description: White level detection error
When the scanner was turned on, the second sampling by AGC (automatic gain control) failed to achieve a value within the range –7 to 0 of the target value 128.
Causes: • Standard white plate defective, dirty
• Moisture inside the scanner unit
• SBUÅÆ IPU harnesses defective
• BCU ÅÆ IPU harnesses defective
• SBU defective
• IPU defective
• BCU defective

Code: SC143

Description: SBU Error 1
When the scanner was turned on, the SBU (Sensor Board Unit) level adjustment, black level check, and final SBU white level check failed.
Causes: • SBU defective
• IPU defective
• BCU defective
• Harness between the SBU and IPU defective
• Harness between the BCU-IPU defective
• Standard white plate not installed correctly, or is dirty
• Scanner mirrors and/or lenses are dirty or installed incorrectly

Code: SC144

Description: SBU Error 2
At power on:
• The SYDI terminal signal did not go HIGH within 1 s
• The specified SBU (Sensor Board Unit) ID (GASBUP and LM98513) could not be read after 3 tries
Causes: • SBU defective
• BCU defective
• Harness between SBU and IPU defective

Code: SC161

Description: IPU Error
At power on, or when the machine returns from an energy save mode, the self-diagnostic program returned an IPU error.
Causes: • IPU defective
• Connection between SBU and IPU is loose, broken, or defective

Code: SC165

Description: Illegal Copy Data Security Error
The "Data Security for Copying Feature" in the User Tools is set to "ON" without the ICIB-2 installed.
Causes: • Copy Data Security Unit option board is not installed
• Copy Data Security Unit board is defective
Note:
• The "Data Security for Copying" feature in the User Tools must be set to "OFF" before the ICIB-2 is removed.
• To switch this feature off/on: [User Tools]> System Settings> Administrator Tools> Next.> Data Security for Copying> Select Off/On.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie