Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC1500 — Trang 3/11

Code: 211

Description: Main scan encoder error
The carriage unit does not stop at home position (rear side) or reverse position (front side).
Causes: • Defective main scan drive motor • Main scan encoder coming off • Defective main scan encoder sensor

Code: 503

Description: Tray 2 (optional paper tray unit) feed error
• The lift sensor is not activated within 18 seconds twice consecutively after the tray lift motor starts lifting the bottom plate. • When the tray lowers, the tray lift sensor does not go off within 1.5 sec twice consecutively.
Causes: • Defective or disconnected tray lift motor • Paper or other obstacle trapped between tray and motor • Pick-up solenoid disconnected or blocked by an obstacle • Reverse connection of harness

Code: 504

Description: Tray 3 (optional paper tray unit) feed error
• The lift sensor is not activated within 18 seconds twice consecutively after the tray lift motor starts lifting the bottom plate. • When the tray lowers, the tray lift sensor does not go off within 1.5 sec twice consecutively.
Causes: • Defective or disconnected tray lift motor • Paper or other obstacle trapped between tray and motor • Pick-up solenoid disconnected or blocked by an obstacle • Reverse connection of harness

Code: 506

Description: Paper feed motor lock error (optional paper tray unit) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
Causes: • Defective paper feed motor • Too much load on the drive mechanism

Code: 520

Description: Sub scan motor error
The sub scan motor does not reply for 100ms when a machine sends the "stop" command to the sub scan motor.
Causes: • Defective sub scan encoder sensor • Timing belt of the sub scan encoder is come off. • Defective sub scan motor

Code: 570

Description: Charge bias leak
High voltage unit sends a signal of charge bias leak.
Causes: • Defective charge roller • Defective high voltage unit

Code: 571

Description: Ink head temperature error
The temperature sensor at the ink head detects unusual temperature for 0.8 seconds.
Causes: • Disconnect harness • Defective temperature sensor at the ink head

Code: 572

Description: Belt temperature error
The temperature sensor at the belt unit detects unusual temperature for 0.8 seconds.
Causes: • Disconnect harness • Defective temperature sensor at the ink head
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie