Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC2000 — Trang 23/24

Code: 880

Description: File format converter error
The file format converter does not respond.
Causes: • Defective file format converter
Remedy: Replace the file format converter.

Code: 900

Description: Electric counter error
Abnormal data in the counters.
Causes: • Defective NVRAM • Defective controller
Remedy: 1. Check the connection between the NVRAM and controller. 2. Replace the NVRAM. 3. Replace the controller.

Code: 910...914

Description: External Controller Error
Causes:
Remedy:

Code: 919

Description: External Controller Error 6
While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, or BREAK signal from the other station was detected.
Causes: Power outage at the EFI controller. EFI controller was rebooted. Connection to EFI controller loose
Remedy:

Code: 920

Description: Printer application error
An error is detected in the printer application program.
Causes: Defective software. Unexpected hardware resource (e.g., memory shortage).
Remedy: 1. Software defective; switch off/on, or change the controller firmware if the problem is not solved 2. Insufficient memory

Code: 921

Description: Printer font error
A necessary font is not found in the SD card.
Causes: A necessary font is not found in the SD card. The SD card data is corrupted.
Remedy: 1. Check that the SD card has the correct data.

Code: 925

Description: Netfile function error
The management area or management file on the HDD is corrupted.
Causes: Defective HDD. Data inconsistency (e.g., caused by power failure)
Remedy: When SC 860-865 keep occurring: 1. Follow the troubleshooting procedures. In other cases: 1. Initialize the netfile partition. 2. Initialize the hard disk. 3. Replace the HDD.

Code: 990

Description: Software performance error
The software makes an unexpected operation.
Causes: Defective software. Defective controller. Software errored.
Remedy: 1. Turn the main switch off and on. 2. Reinstall the controller and/or engine main firmware.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie