Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC2051 — Trang 9/23

Code: 508

Description: By-pass bottom plate error
The signal from the by-pass tray HP sensor does not change for 1.0 second after the by-pass motor has rotated counterclockwise. If this condition occurs three consecutive times, the SC is generated.
Causes: • Disconnect or defective harness of the by-pass motor • Defective or disconnected connection for the by-pass motor. • Defective by-pass motor • Disconnect or defective harness of the by-pass HP sensor • Defective or disconnected connection for the by-pass HP sensor. • Defective by-pass HP sensor
Remedy: Check the operation of the by-pass motor with SP5804-023. No operation: 1. Check the harness connection of the by-pass tray and duplex unit. 2. Replace the by-pass motor. Operation: Check the operation of the by-pass HP sensor with SP5803-048 while the by-pass motor is rotating. No change of Bit 0 1. Check the harness connection of the by-pass HP sensor. 2. Replace the by-pass HP sensor.

Code: 530

Description: Ventilation fan: front error
The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
Causes: • Defective ventilation fan: front or rear • Disconnected or defective harness • Defective DRB • Defective BCU
Remedy: 1. Check or replace the harness. 2. Replace the ventilation fan: front (SC530) or rear (SC531). 3. Replace the DRB. 4. Replace the BCU.

Code: 531

Description: Ventilation fan: rear error
The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
Causes: • Defective ventilation fan: front or rear • Disconnected or defective harness • Defective DRB • Defective BCU
Remedy: 1. Check or replace the harness. 2. Replace the ventilation fan: front (SC530) or rear (SC531). 3. Replace the DRB. 4. Replace the BCU.

Code: 532

Description: Laser unit fan error
The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
Causes: • Defective laser unit fan • Disconnected or defective harness • Defective drive board • Defective BCU
Remedy: 1. Check or replace the harness. 2. Replace the laser unit fan. 3. Replace the laser unit fan motor. 4. Replace the DRB. 5. Replace the BCU.

Code: 533

Description: Fusing front fan error
The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
Causes: • Defective fusing front fan • Disconnected or defective harness • Defective DRB • Defective BCU
Remedy: 1. Check or replace the harness. 2. Replace the fusing front fan. 3. Replace the DRB. 4. Replace the BCU.

Code: 534

Description: Fusing rear fan error
The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
Causes: • Defective fusing rear fan • Disconnected or defective harness • Defective DRB • Defective BCU
Remedy: 1. Check or replace the harness. 2. Replace the fusing rear fan. 3. Replace the DRB. 4. Replace the BCU.

Code: 535

Description: Controller box fan error
The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
Causes: • Defective controller box fan • Disconnected or defective harness • Defective BCU
Remedy: 1. Check or replace the harness. 2. Replace the controller box fan. 3. Replace the BCU.

Code: 536

Description: Junction gate solenoid fan error
The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
Causes: • Defective junction gate solenoid fan • Disconnected or defective harness • Defective BCU
Remedy: 1. Check or replace the harness. 2. Replace the junction gate solenoid fan. 3. Replace the BCU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie