Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC3003SP — Trang 40/45

Code: SC876-02

Description: Log Data Error 2. An error was detected in the handling of the log data at power on or during machine operation.
Causes: Log encryption is enabled but encryption module is not installed.
Remedy: • Replace or set again the encryption module. • Disable the log encryption setting.

Code: SC876-03

Description: Log Data Error 3 An error was detected in the handling of the log data at power on or during machine operation.
Causes: Inconsistency of encryption key between NV-RAM and HDD.
Remedy: • Disable the log encryption setting. • Initialize LCS memory (SP5801-019). • Initialize the HDD (SP5-832-004).

Code: SC876-04

Description: Log Data Error 4 An error was detected in the handling of the log data at power on or during machine operation.
Causes: • Log encryption key is disabled but the log data file is encrypted. (NVRAM data corruption) • Log encryption key is enabled but the log data file is not encrypted. (NVRAM data corruption)
Remedy: Initialize the HDD (SP5-832-004).

Code: SC876-05

Description: Log Data Error 5 An error was detected in the handling of the log data at power on or during machine operation.
Causes: • Only the NV-RAM has been replaced with one previously used in another machine. • Only the HDD has been replaced with one previously used in another machine.
Remedy: • Attach the original NV-RAM. • Attach the original HDD. • With the configuration that caused the SC, initialize the HDD (SP5-832-004).

Code: SC876-99

Description: Log Data Error 99 An error was detected in the handling of the log data at power on or during machine operation.
Causes: Other causes
Remedy:

Code: SC877-00

Description: Data Overwrite Security card error The "Auto Erase Memory" function of the Data Overwrite Security is set to on but it cannot be done.
Causes: • Data Overwrite Security option SD card is broken. • Data Overwrite Security option SD card has been removed.
Remedy: • If the SD card is broken, prepare a new Data Overwrite Security option SD card and replace the NVRAM. • If the SD card has been removed, turn the main power off and reinstall a working Data Overwrite Security option SD card.

Code: SC878-00

Description: TPM electronic authentication error The machine failed TPM electronic authentication. System hash registered in the TPM did not match the data on the USB flash.
Causes: • System module was updated in an unauthorized manner. • USB flash is not working correctly.
Remedy: Replace the board.

Code: SC878-01

Description: USB Flash error USB Flash file system error
Causes: USB Flash file system has been destroyed.
Remedy: Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie