Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC4500 — Trang 19/25

Code: 743

Description: Booklet stapler motor error 1
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. For the 2000/3000-sheet (booklet) finisher The front stapler unit saddle-stitch motor does not start operation within the specified time.
Causes: • Motor overload • Loose connection of the front stapler motor • Defective front stapler motor
Remedy: Replace the front stapler motor.

Code: 744

Description: Booklet staple motor error 2
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. For the 2000/3000-sheet (booklet) finisher The rear stapler unit saddle-stitch motor does not start operation within the specified time.
Causes: • Motor overload • Loose connection of the rear stapler motor • Defective rear stapler motor
Remedy: Replace the front stapler motor.

Code: 746

Description: 1000-sheet booklet finisher: Stack feed motor error • This SC is not used in this machine.
Causes:
Remedy:

Code: 750

Description: 1000/2000/3000-sheet (booklet) finisher: Tray lift motor error
The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. The upper tray paper height sensor does not change its status with the specified time after the tray raises or lowers.
Causes:
Remedy: 1. Check the connections to the shift tray motor. 2. Defective shift tray motor.

Code: 760

Description: Finisher punch motor error
The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Punch HP sensor disconnected, defective • Punch motor disconnected or defective • Punch motor overload due to obstruction
Remedy: 1. Check the connections and cables for the punch motor and HP sensor. 2. Check for blockages in the punch motor mechanism. 3. Replace the punch HP sensor and/or punch motor 4. Replace the finisher main board.

Code: 761

Description: Finisher folder plate motor error
The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Folder plate HP sensor disconnected, defective • Folder plate motor disconnected, defective • Folder plate motor overloaded due to obstruction.
Remedy: 1. Check the connections and cables for the folder plate motor and HP sensor. 2. Check for blockages in the folder plate motor mechanism. 3. Replace the folder plate HP sensor and/or folder plate motor 4. Replace the finisher main board.

Code: 763

Description: Punch movement motor error
The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the punch movement motor. 2. Defective punch movement motor

Code: 764

Description: Paper position sensor slide motor error
The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the paper position sensor slide motor. 2. Defective paper position sensor slide motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie