Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC4500 — Trang 21/25

Code: 824

Description: Self-diagnosis error: Standard NVRAM
The controller cannot recognize the standard NVRAM installed or detects that the NVRAM is defective.lure
Causes: • Loose connection • Defective standard NVRAM • Defective controller
Remedy: 1. Check the standard NVRAM is firmly inserted into the socket. 2. Replace the NVRAM. 3. Replace the controller

Code: 826

Description: Self-diagnostic Error: RTC/optional NVRAM
The RTC device is not detected.
Causes: • RTC defective • NVRAM without RTC installed • Backup battery discharged
Remedy: 1. Replace the NVRAM with another NVRAM with an RTC device.

Code: 827

Description: Self-diagnostic error: Standard SDRAM DIMM
[XXXX]: Detailed error code
Causes: [0201] Verification error Error detected during a write/verify check for the standard RAM (SDRAM DIMM). • Loose connection • Defective SDRAM DIMM • Defective controller 1. Turn the main switch off and on. 2. Replace the SDRAM DIMM. 3. Replace the controller. [0202] Resident memory error The SPD values in all RAM DIMM are incorrect or unreadable. • Defective RAM DIMM • Defective SPD ROM on RAM DIMM • Defective 12C bus 1. Replace the RAM DIMM.
Remedy:

Code: 828

Description: Self-diagnostic error: ROM
[XXXX]: Detailed error code
Causes: [0101] Check sum error 1 • The boot monitor and OS program stored in the ROM DIMM is checked. If the check sum of the program is incorrect, this SC code is displayed. [0104] Check sum error 2 All areas of the ROM DIMM are checked. If the check sum of all programs stored in the ROM DIMM is incorrect, this SC code is displayed. - - • Defective ROM DIMM • Defective controller - - 1. Turn the main switch on and off. 2. Replace the ROM DIMM 3. Replace the controller.
Remedy:

Code: 829

Description: Self-diagnosis error: optional RAM
Causes: [0401] Verification error (Slot 1) The data stored in the optional RAM in Slot 1 does not match the data when reading. [0402] Composition error (Slot 1) The result of checking the composition data of the optional RAM in Slot 1 on the controller is incorrect. - - • Not specified RAM DIMM installed • Defective RAM DIMM - - 1. Turn the main switch off and on. 2. Replace the RAM DIMM. 3. Replace the controller board.
Remedy:

Code: 851

Description: IEEE1394 interface error
The 1394 interface is unusable.
Causes: • Defective IEEE1394 • Defective controller.
Remedy: 1. Turn the main switch off and on. 2. Replace the IEEE1394 interface board. 3. Replace the controller.

Code: 853

Description: Wireless LAN card not detected
The wireless LAN card is not detected before communication is established, though the wireless LAN board is detected.
Causes: • Loose connection
Remedy: 1. Check the connection.

Code: 854

Description: Wireless LAN/Bluetooth card not detected
The wireless LAN/Bluetooth card is not detected after communication is established, but the wireless LAN board is detected.
Causes: • Loose connection
Remedy: 1. Check the connection.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie