Mã lỗi Ricoh Aficio MPC4501 — Trang 12/26
Code:
Tất cả lỗi (208)
101
120
121
141
142
144
161-001
161-002
161-003
165
185
186
187
188
189
195
202
203
204
210
211
212
213
220
221
222
223
224
225
226
227
230
231
232
233
234
235
236
237
240
241
242
243
285
312
313
314
315
360
361
362
363
364
365
366
367
372
373
374
375
380
381
382
383
396
397
398
399
400
441
442
443
452
460
490
491
492
498
501
502
503-01
503-02
504-01
504-02
505-1
505-2
530
531
532
533
534
535
536
540
541
542
543
544
547
548
551
552
553
554
557
559
561
563
564
565
569
571
581
582
585
610
611
620
621
622
623
632
633
634
635
636
641
650
651
669
670
671
672
681
682
683
687
690
700
701
705
708
715-001
715-002
715-003
715-004
715-006
721
723
725
730
740
741
742
743
744
750
753
760
761
763
764
765
766
767
770
791
792
816
819
820
833
851
853
854
855<br> 856
857
858
859
860
861
863
864
865
866
867
868
870
872
873
874
875
876
877
878
880
900
910...914
919
920
921
990
991
992
994
995
997
998
Description: IH coil fan error The machine does not detect the fan motor lock signal for 2 seconds while the IH coil fan turns on.
Causes: • Disconnected harness • Overload on the IH coil fan motor • Defective IH coil fan motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the IH coil fan. 3. Replace the IOB.
Description: IH inverter fan error The machine does not detect the fan motor lock signal for 2 seconds while the IH inverter fan turns on.
Causes: • Disconnected harness • Overload on the IH inverter fan motor • Defective IH inverter fan motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the IH inverter fan. 3. Replace the IOB.
Description: Second duct fan error The machine does not detect the fan motor lock signal for 2 seconds while the second duct fan turns on.
Causes: • Disconnected harness • Overload on the second duct fan motor • Defective second duct motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the second duct fan. 3. Replace the IOB.
Description: Paper exit fan error The machine does not detect the fan motor lock signal for 2 seconds while the paper exit fan turns on.
Causes: • Disconnected harness • Overload on the paper exit fan motor • Defective paper exit motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the paper exit fan. 3. Replace the IOB.
Description: Controller fan error The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
Causes: • Defective controller fan motor • Disconnected or defective harness • Defective IOB
Remedy: 1. Replace the third duct fan motor. 2. Check or replace the harness. 3. Replace the IOB.
Description: Fusing/Paper exit motor error The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.
Causes: • Motor overload • Defective fusing/paper exit motor
Remedy: 1. Check or replace the harness. 2. Replace the fusing/paper exit motor. 3. Replace the +24V fuse on the PSU.
Description: Heating roller thermopile error The temperature measured by the heating roller thermopile does not reach 0°C for 6 seconds.
Causes: • Loose connection of the heating roller thermopile • Defective heating roller thermopile • Defective thermopile
Remedy: 1. Check if the heating roller thermopile is firmly connected. 2. Replace the heating roller thermopile.
Description: Heating roller warm-up error 1 • The heating roller temperature does not reach 80°C for 20 seconds after the IH inverter turned on. • The center temperature of the heating roller does not reach the ready temperature for 90 seconds after the IH inverter turned on.
Causes: • Dirty or defective thermopile • Defective thermistor • Defective heating roller lamp
Remedy: 1. Check if the heating roller thermopile is firmly connected. 2. Replace the thermopile. 3. Replace the IH coil unit.