Description: External Controller down While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, or BREAK signal from the other station was detected.
Causes: • Power outage at the EFI controller • EFI controller was rebooted • Connection to EFI controller loose
Description: Printer application error -00 No response when starting up the PM -01 Timeout error during the PM operation -02 Working memory error -03 Cannot start-up the filtering process -04 Abnormal exit from the filtering process
Causes: An error is detected in the printer application program and operation cannot continue. • Defective software • Unexpected hardware resource (e.g., memory shortage)
Remedy: 1. Software defective; turning on and off the main power switch 2. Insufficient memory; additional memory
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.