Description: Tube cooling fan error The machine does not detect the fan motor lock signal for 100 ms while the third duct fan or tube cooling fan turns on.
Causes: • Disconnected harness • Overload on the third duct fan motor or tube cooling fan motor • Defective third duct motor or tube cooling motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the third duct fan or tube cooling fan. 3. Replace the IOB.
Description: AC controller board fan error The machine does not detect the fan motor lock signal for 100 ms while the AC controller board fan turns on.
Causes: • Disconnected harness • Overload on the AC controller board fan motor • Defective AC controller board fan motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the AC controller board fan. 3. Replace the IOB.
Description: Heating roller warm-up error 1 • The heating roller temperature does not reach 80°C for 20 seconds after the inverter turned on. • The center temperature of the heating roller does not reach the ready temperature for 90 seconds after the fusing lamp turned on.
Causes: • Dirty or defective thermopile
Remedy: 1. Check if the heating roller thermopile is firmly connected. 2. Replace the thermopile.
Description: Heating roller overheat: Center (hardware error) During stand-by mode or a print job, the detected heating roller temperature reaches 220°C.
Causes: • Defective AC controller board • Defective IOB • Defective IPU • Defective fusing control system
Remedy: 1. Replace the AC controller board. 2. Replace the IOB. 3. Replace the IPU. 4. Replace the fusing unit and reset the counter of the fusing unit using SP3-902-014. Important: The fusing unit cannot be used because an abnormal high temperature was detected. After this SC occurs, the counter reset of the fusing unit should be done manually using SP3-902-014 because the counter reset is not done automatically.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.