Description: Charge Roller Power Pack Output Error (K). The interrupt that checks the status of the PCU power pack every 10 ms detected SC signals 15 times consecutively. Details: In case of an overcurrent, the Charge Roller Power Pack outputs SC signals. The machine monitors it, and issues an SC when an error occurs.
Causes: • High voltage harness shorted. • Leakage around the charge roller caused by a conductive object.
Description: Charge Roller Power Pack Output Error (C). The interrupt that checks the status of the PCU power pack every 10 ms detected SC signals 15 times consecutively. Details: In case of an overcurrent, the Charge Roller Power Pack outputs SC signals. The machine monitors it, and issues an SC when an error occurs.
Causes: • High voltage harness shorted. • Leakage around the charge roller caused by a conductive object.
Description: Charge Roller Power Pack Output Error (M). The interrupt that checks the status of the PCU power pack every 10 ms detected SC signals 15 times consecutively. Details: In case of an overcurrent, the Charge Roller Power Pack outputs SC signals. The machine monitors it, and issues an SC when an error occurs.
Causes: • High voltage harness shorted. • Leakage around the charge roller caused by a conductive object.
Description: Charge Roller Power Pack Output Error (Y). The interrupt that checks the status of the PCU power pack every 10 ms detected SC signals 15 times consecutively. Details: In case of an overcurrent, the Charge Roller Power Pack outputs SC signals. The machine monitors it, and issues an SC when an error occurs.
Causes: • High voltage harness shorted. • Leakage around the charge roller caused by a conductive object.
Description: Charge FB Voltage Error (K). On plotter startup, the charge FB (feed-back) voltage was 0.3V or less for 15 consecutive readings. Details: SC issued when electric current does not pass after charge bias is applied, which can be caused when a harness is disconnected or damaged, or when the charge roller or the drum is not installed.
Causes: • High-voltage harness damaged or not connected correctly. • Charge roller or drum not installed
Description: Charge FB Voltage Error (C). On plotter startup, the charge FB (feed-back) voltage was 0.3V or less for 15 consecutive readings. Details: SC issued when electric current does not pass after charge bias is applied, which can be caused when a harness is disconnected or damaged, or when the charge roller or the drum is not installed.
Causes: • High-voltage harness damaged or not connected correctly. • Charge roller or drum not installed
Description: Charge FB Voltage Error (M). On plotter startup, the charge FB (feed-back) voltage was 0.3V or less for 15 consecutive readings. Details: SC issued when electric current does not pass after charge bias is applied, which can be caused when a harness is disconnected or damaged, or when the charge roller or the drum is not installed.
Causes: • High-voltage harness damaged or not connected correctly. • Charge roller or drum not installed
Description: Charge FB Voltage Error (Y). On plotter startup, the charge FB (feed-back) voltage was 0.3V or less for 15 consecutive readings. Details: SC issued when electric current does not pass after charge bias is applied, which can be caused when a harness is disconnected or damaged, or when the charge roller or the drum is not installed.
Causes: • High-voltage harness damaged or not connected correctly. • Charge roller or drum not installed
Remedy: • Fix the problem.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.