• Code: SC722-30
• Description: Jogger Motor Error (D707) • When moving to the home position, home position was not detected within specified time (t0 ms). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
• Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
• Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

• Code: SC722-33
• Description: Positioning Roller Motor Error (D707) • When moving to the home position, home position was not detected within specified number of pulses (p0 pulses). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified number of pulses (p1 pulses). (The first time: jam display, the second time: SC)
• Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
• Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

• Code: SC722-34
• Description: Positioning Roller Transport Motor Error (D707) Motor driver detected an open circuit or short-circuit. (SC from the first time)
• Causes: • Motor defective • Connecter disconnected • Home position sensor defective
• Remedy: • Check motor connection. • Replace the motor. • Replace the PCB.

• Code: SC722-35
• Description: Stack Plate-Center Motor Error (D707) • The drive unit in the staple tray does not return to the home position within a specified time (t0ms). (The first time: jam display, the second time: SC) • When the drive unit in the staple tray was moving away from the home position, the home position was still detected after a specified time (t1ms). (The first time: jam display, the second time: SC)
• Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
• Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

• Code: SC722-36
• Description: Stapler Plate-Front Motor Error (D707) • The drive unit in the staple tray does not return to the home position within a specified time (t0ms). (The first time: jam display, the second time: SC) • When the drive unit in the staple tray was moving away from the home position, the home position was still detected after a specified time (t1ms). (The first time: jam display, the second time: SC)
• Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
• Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

• Code: SC722-37
• Description: Stapler Plate-Rear Motor Error (D707) • The drive unit in the staple tray does not return to the home position within a specified time (t0ms). (The first time: jam display, the second time: SC) • When the drive unit in the staple tray was moving away from the home position, the home position was still detected after a specified time (t1ms). (The first time: jam display, the second time: SC)
• Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
• Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

• Code: SC722-39
• Description: Stapler Movement Motor Error (D707) • When moving to the home position, home position was not detected within specified time (t0 ms). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified time (t1 ms). (The first time: jam display, the second time: SC)
• Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
• Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.

• Code: SC722-40
• Description: Stapler Rotation Motor Error (D707) • When moving to the home position, home position was not detected within specified time (t0 ms). (The first time: jam display, the second time: SC) • When moving from the home position, home position was still detected after specified time (t1 ms). (The first time: jam display, the second time: SC)
• Causes: • Motor defective • Connecter disconnected • Overload • Home position sensor defective
• Remedy: • Check the connections of the motor and home position sensor. • Replace the motor/home position sensor. • Replace the PCB.