Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC8002SP — Trang 61/63

Code: SC910-00

Description: External Controller Error 1 Notification from external application (external controller)
Causes: Subject to external application (external controller) specification
Remedy: Turn the main power off/on.

Code: SC911-00

Description: External Controller Error 2 Notification from external application (external controller)
Causes: Subject to external application (external controller) specification
Remedy: Turn the main power off/on.

Code: SC912-00

Description: External Controller Error 3 Notification from external application (external controller)
Causes: Subject to external application (external controller) specification
Remedy: Turn the main power off/on.

Code: SC913-00

Description: External Controller Error 4 Notification from external application (external controller)
Causes: Subject to external application (external controller) specification
Remedy: Turn the main power off/on.

Code: SC914-00

Description: External Controller Error 5 Notification from external application (external controller)
Causes: Subject to external application (external controller) specification
Remedy: Turn the main power off/on.

Code: SC915-01 ... SC915-05

Description: SC915-01 A External Controller Error 6 (Egret board error) SC915-02 A External Controller Error 6 (HDD serial communication error) SC915-03 A External Controller Error 6 (CPU temperature rise) SC915-04 A External Controller Error 6 (Unable to communicate with GW controller because invalid command was received) SC915-05 A External Controller Error 6(Unable to communicate with GW controller because of an error)
Causes: Notification from external application (external controller)
Remedy: Replace the Egret controller board.

Code: SC919-00

Description: External controller down While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, of BREAK signal from the other station was detected.
Causes: External controller and the machine had been operating correctly (*) but the external controller was turned off or rebooted, or the video bus was disconnected. * Printing or scanning using the external controller.
Remedy: Turn the main power off/on.

Code: SC920-00 ... SC920-04

Description: SC920-00 B Printer application error (No response at PM startup) SC920-01 B Printer application error (Timeout during PM operation) SC920-02 B Printer application error (Unable to obtain work memory) SC920-03 B Printer application error (Unable to start filter process) SC920-04 B Printer application error (Abnormal termination of filter process). When an error is detected in the application, which makes continued operation impossible.
Causes: • Software bug • Unexpected hardware configuration (such as insufficient memory)
Remedy: Turn the main power off/on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie