Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPC8002SP — Trang 55/63

Code: SC840-00

Description: EEPROM access error An error occurred during I/O processing. • A read error occurred and 3 retries failed. • A write error occurred.
Causes: EEPROM defective or end-of-life
Remedy:

Code: SC841-00

Description: EEPROM read data error Compared the data from 3 areas of the EEPROM mirror data with the original data and all 3 of them were different from the original data.
Causes: Data in the specific area of the EEPROM has been modified.
Remedy:

Code: SC842-00

Description: Nand-Flash updating verification error During remote ROM update or ROM update, the SCS detected a write error (verify error) regarding the data written to the Nand-Flash.
Causes: Nand-Flash damaged
Remedy: Turn the main power off/on.

Code: SC842-01

Description: Nand-Flash bad block number exceeding the threshold When the status of the Nand-Flash was checked at power-on or when returning from energy saver mode, the number of bad blocks exceeded the threshold.
Causes: Nand-Flash bad block number exceeding the threshold
Remedy: Replace the controller board.

Code: SC842-02

Description: Number of times of Nand-Flash block erase exceeding the threshold When the status of the Nand-Flash was checked at power-on or when returning from energy saver mode, the number of times the block was erased exceeded the threshold.
Causes: Number of times of Nand-Flash block erase exceeding the threshold
Remedy: Replace the controller board.

Code: SC853-00

Description: Bluetooth device connection error The Bluetooth hardware (USB type) was connected after the machine was turned on.
Causes: The Bluetooth hardware (USB type) was connected after the machine was turned on.
Remedy: Turn the main power with the Bluetooth hardware (USB type) connected.

Code: SC854-00

Description: Bluetooth device disconnected The Bluetooth hardware (USB type) was disconnected after the machine was turned on.
Causes: The Bluetooth hardware (USB type) was disconnected after the machine was turned on.
Remedy: Turn the main power with the Bluetooth hardware (USB type) connected.

Code: SC855-01

Description: Wireless LAN board error (driver attachment failure) Wireless LAN board error (wireless LAN card: 802.11 is covered)
Causes: • Defective wireless LAN board • Loose connection
Remedy: • Turn the main power off/on. • Replace wireless LAN board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie