Description: Toner supply error (K). K: Amount of toner on the ID sensor pattern printed and read between sheets (SP3-300-001) is less than the lower threshold (SP3-301-023) and accumulated toner clutch ON time (SP3-301-041) is greater than the upper threshold (SP3-301-031). CMY: Amount of toner on the ID sensor pattern printed and read between sheets (SP3-300-002 to 004) is less than the lower threshold (SP3-301-024) and accumulated toner clutch ON time (SP3-301-042 to 044) is greater than the upper threshold (SP3-301-031). Details: This SC is issued when the toner end sensor continues detecting the presence of toner falsely.
Causes: • Toner end sensor cleaner spring broken • Toner end sensor cleaner spring not set correctly • Toner end sensor defective
Description: Toner supply error (C). K: Amount of toner on the ID sensor pattern printed and read between sheets (SP3-300-001) is less than the lower threshold (SP3-301-023) and accumulated toner clutch ON time (SP3-301-041) is greater than the upper threshold (SP3-301-031). CMY: Amount of toner on the ID sensor pattern printed and read between sheets (SP3-300-002 to 004) is less than the lower threshold (SP3-301-024) and accumulated toner clutch ON time (SP3-301-042 to 044) is greater than the upper threshold (SP3-301-031). Details: This SC is issued when the toner end sensor continues detecting the presence of toner falsely.
Causes: • Toner end sensor cleaner spring broken • Toner end sensor cleaner spring not set correctly • Toner end sensor defective
Description: Toner supply error (M). K: Amount of toner on the ID sensor pattern printed and read between sheets (SP3-300-001) is less than the lower threshold (SP3-301-023) and accumulated toner clutch ON time (SP3-301-041) is greater than the upper threshold (SP3-301-031). CMY: Amount of toner on the ID sensor pattern printed and read between sheets (SP3-300-002 to 004) is less than the lower threshold (SP3-301-024) and accumulated toner clutch ON time (SP3-301-042 to 044) is greater than the upper threshold (SP3-301-031). Details: This SC is issued when the toner end sensor continues detecting the presence of toner falsely.
Causes: • Toner end sensor cleaner spring broken • Toner end sensor cleaner spring not set correctly • Toner end sensor defective
Description: Toner supply error (Y). K: Amount of toner on the ID sensor pattern printed and read between sheets (SP3-300-001) is less than the lower threshold (SP3-301-023) and accumulated toner clutch ON time (SP3-301-041) is greater than the upper threshold (SP3-301-031). CMY: Amount of toner on the ID sensor pattern printed and read between sheets (SP3-300-002 to 004) is less than the lower threshold (SP3-301-024) and accumulated toner clutch ON time (SP3-301-042 to 044) is greater than the upper threshold (SP3-301-031). Details: This SC is issued when the toner end sensor continues detecting the presence of toner falsely.
Causes: • Toner end sensor cleaner spring broken • Toner end sensor cleaner spring not set correctly • Toner end sensor defective
Description: Development sleeve home position signal detection error (K). Cannot detect the home position signal within specified time.
Causes: • Home position sensor defective/loose connection/harness damaged/Connecter disconnected • Home position sensor smudged
Remedy: • Check if the home position sensor connector is connected correctly. • Check the home position sensor for abnormality. • Replace the home position sensor if it is abnormal. • Check the sensor for smudges. Blow it with air and check again.
Description: Development sleeve home position signal detection error (C). Cannot detect the home position signal within specified time.
Causes: • Home position sensor defective/loose connection/harness damaged/Connecter disconnected • Home position sensor smudged
Remedy: • Check if the home position sensor connector is connected correctly. • Check the home position sensor for abnormality. • Replace the home position sensor if it is abnormal. • Check the sensor for smudges. Blow it with air and check again.
Description: Development sleeve home position signal detection error (M). Cannot detect the home position signal within specified time.
Causes: • Home position sensor defective/loose connection/harness damaged/Connecter disconnected • Home position sensor smudged
Remedy: • Check if the home position sensor connector is connected correctly. • Check the home position sensor for abnormality. • Replace the home position sensor if it is abnormal. • Check the sensor for smudges. Blow it with air and check again.
Description: Development sleeve home position signal detection error (Y). Cannot detect the home position signal within specified time.
Causes: • Home position sensor defective/loose connection/harness damaged/Connecter disconnected • Home position sensor smudged
Remedy: • Check if the home position sensor connector is connected correctly. • Check the home position sensor for abnormality. • Replace the home position sensor if it is abnormal. • Check the sensor for smudges. Blow it with air and check again.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.