Danh mục sản phẩm

Code :

Code: 910 ... 914
Description: 910 B External controller error 1 911 B External controller error 2 912 B External controller error 3 913 B External controller error 4 914 B External controller error 5
Causes: The external controller alerted the machine about an error.
Remedy: • Refer to the instructions for the external controller

Code: 919
Description: External controller error 6 While EAC (External Application Converter), the conversion module, was operating normally, the receipt of a power line interrupt signal from the FLUTE serial driver was detected, or BREAK signal from the other station was detected.
Causes: • Controller RW3600 power outtage • Controller RW3600 rebooted • Connection to Controller RW3600 loose
Remedy:

Code: 920
Description: Printer error 1 An internal application error was detected and operation cannot continue.
Causes: • Software defective • Turn the machine power off/on, or change the controller firmware • Insufficient memory
Remedy:

Code: 921
Description: Printer Error 2. When the printer application started, the font designated for use could not be found on the SD card.
Causes: • The font is not on the SD card
Remedy:

Code: 953
Description: Scanner start error The job was ready to start with the selected image processing mode, but the program did not receive a start signal from the IPU.
Causes: • Firmware bug • Update the scanner firmware • IPU defective
Remedy:

Code: 954
Description: Printer Image Setting Error The settings that are required for image processing using the printer controller are not sent from the IPU.
Causes: • Firmware bug • IPU defective
Remedy:

Code: 955
Description: Memory Setting Error The settings that are required for image processing using the memory are not sent from the IPU.
Causes: • Firmware bug • Hard disk unit defective • Controller defective • MCU defective • IPU defective
Remedy:

Code: 964
Description: Scanner Start Error During scanned image processing, another command to start scanning was received.
Causes: • Scanner firmware defective • Update scanner firmware
Remedy:

‹ First < 7 8 9 10 11 >

0