Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MPW7140 — Trang 14/15

Code: SC880

Description: File Format Converter (MLB) error GW A request to get access to the MLB was not answered within the specified time.
Causes: • MLB defective, replace the MLB
Remedy:

Code: SC900

Description: Electrical total counter error GW The total counter contains something that is not a number.
Causes: • NVRAM incorrect type • NVRAM defective • NVRAM data scrambled • Unexpected error from external source
Remedy:

Code: SC901

Description: Mechanical counter error At the beginning of a count, the machine detected that the mechanical was not connected. Note: This function is provided only in EXP machines.
Causes: • Mechanical counter disconnected • Mechanical counter connector loose or defective
Remedy:

Code: SC910 ... SC914

Description: SC910 B External controller error 1 GW SC911 External controller error 2 GW SC912 External controller error 3 GW SC913 External controller error 4 GW SC914 External controller error 5 GW An external application sent an error notice.
Causes: • VLB defective • I/F cable defective
Remedy:

Code: SC919

Description: External controller down GW The EAC received an interrupt signal from the FLUTE serial driver during print jobs in progress and the connection between the copier and external controller was broken. Note: The EAC is the External API Converter.
Causes: 1. Turn the machine off. 2. Check the I/F cable to determine if it became disconnected during operation. 3. Turn the machine on.
Remedy:

Code: SC920

Description: Printer error 1 GW An internal application error was detected and operation cannot continue.
Causes: • Software defective; turn the machine off/on, or change the controller firmware • Insufficient memory
Remedy:

Code: SC921

Description: Printer error 2 GW When the application started, the necessary font was not on the SD card.
Causes: • Font not on the SD card
Remedy:

Code: SC954

Description: Printer Image Setting Error The IPU did not issue the signal required to start image processing for the printing mode within 60 s after the paper stops for registration.
Causes: • Software defective • Replace the software (all firmware modules). • IPU defective
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie