Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Pro C700EX — Trang 30/36

Code: SC747

Description: Stack Plate Motor Error 2: Center Motor (B830)
The stack plate HP sensor (center) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: If the motor is operating 1. Center stack plate HP sensor harness loose, broken, defective 2. Center stack plate HP sensor defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Booklet finisher main board defective

Code: SC748

Description: Stack Plate Motor Error 3: Rear Motor (B830)
The stack plate HP sensor (rear) does not activate within 500 ms after the motor turns on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code
Causes: If the motor is operating 1. Rear stack plate HP sensor harness loose, broken, defective 2. Rear stack plate HP sensor defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Booklet finisher main board defective

Code: SC750

Description: Finisher tray 1 (upper tray lift) motor error
The upper tray paper height sensor does not change its status with the specified time after the tray raises or lowers. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Tray lift motor disconnected, defective • Upper tray paper height sensor disconnected, defective • Finisher main board connection to motor loose • Finisher main board defective

Code: SC753

Description: Stacking Roller Motor Error (B830)
The return drive HP sensor did not detect the stacking roller at the HP sensor within 1 sec. -or- The stacking roller did not leave the home position at the specified time.
Causes: If the motor is operating 1. Return drive HP sensor harness loose, broken, defective 2. Return drive HP sensor defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Finisher main board defective

Code: SC754

Description: Stacking Roller Drag Motor Error (B830)
The stacking roller drag motor did not turn on.
Causes: • Motor harness loose, broken, defective • Motor defective • Finisher control board defective

Code: SC755

Description: Shift Motor Error: 3K Finisher (B830)
The shift tray half-turn sensors: Failed twice to detect the shift tray at the home position at the specified time. -or- Failed twice to detect that the shift tray had left the home position.
Causes: If the motor is operating 1. Half-turn sensor 1, 2 harnesses loose, broken, defective 2. One of the half-turn sensors defective If the motor is not operating: 1. Motor blocked by an obstruction 2. Motor harness loose, broken, defective 3. Motor defective 4. Finisher main board defective

Code: SC760

Description: Finisher punch motor error (B830)
The punch HP sensor is not activated within the specified time after the punch motor turned on. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: • Punch HP sensor disconnected, defective • Punch motor disconnected, defective • Punch motor overload due to obstruction

Code: SC761

Description: Finisher folder plate motor error (D373)
The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure causes a jam error, and the 2nd failure causes this SC code.
Causes: Folder plate HP sensor disconnected, defective Folder plate motor disconnected, defective Folder plate motor overloaded due to obstruction.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie