Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio Pro C720S — Trang 9/85

Code: 309

Description: Charge cleaning unit: Position error: C. The machine does not detect an "OFF" signal from the cleaning unit HP sensor for 3 seconds after the cleaning pad unit has moved to the rear side from its home position (front side). The machine does not detect an "ON" signal from the cleaning unit HP sensor for 18 seconds after the cleaning pad unit has returned to its home position (front side) from the rear side.
Causes: • Disconnected harnesses (charge cleaning HP sensor or charge cleaning motor) • Defective charge cleaning HP sensor • Defective charge cleaning motor
Remedy: 1. Check if the charge cleaning HP sensor is correctly set or the sensor bracket is not bent. 2. Check the harness connection of sensor and motor. 3. Replace the charge cleaning HP sensor. 4. Replace the charge cleaning motor.

Code: 310

Description: Charge cleaning unit: Position error: M. The machine does not detect an "OFF" signal from the cleaning unit HP sensor for 3 seconds after the cleaning pad unit has moved to the rear side from its home position (front side). The machine does not detect an "ON" signal from the cleaning unit HP sensor for 18 seconds after the cleaning pad unit has returned to its home position (front side) from the rear side.
Causes: • Disconnected harnesses (charge cleaning HP sensor or charge cleaning motor) • Defective charge cleaning HP sensor • Defective charge cleaning motor
Remedy: 1. Check if the charge cleaning HP sensor is correctly set or the sensor bracket is not bent. 2. Check the harness connection of sensor and motor. 3. Replace the charge cleaning HP sensor. 4. Replace the charge cleaning motor.

Code: 311

Description: Charge cleaning unit: Position error: Y. The machine does not detect an "OFF" signal from the cleaning unit HP sensor for 3 seconds after the cleaning pad unit has moved to the rear side from its home position (front side). The machine does not detect an "ON" signal from the cleaning unit HP sensor for 18 seconds after the cleaning pad unit has returned to its home position (front side) from the rear side.
Causes: • Disconnected harnesses (charge cleaning HP sensor or charge cleaning motor) • Defective charge cleaning HP sensor • Defective charge cleaning motor
Remedy: 1. Check if the charge cleaning HP sensor is correctly set or the sensor bracket is not bent. 2. Check the harness connection of sensor and motor. 3. Replace the charge cleaning HP sensor. 4. Replace the charge cleaning motor.

Code: 320

Description: Development bias: high voltage error: K. The high voltage error signal of the development unit is detected for 60 ms or more.
Causes: • Defective development HVPS
Remedy: 1. Check the harness connection of the development HVPS. 2. Replace the development HVPS. 3. Replace the development unit.

Code: 321

Description: Development bias: high voltage error: C. The high voltage error signal of the development unit is detected for 60 ms or more.
Causes: • Defective development HVPS
Remedy: 1. Check the harness connection of the development HVPS. 2. Replace the development HVPS. 3. Replace the development unit.

Code: 322

Description: Development bias: high voltage error: M. The high voltage error signal of the development unit is detected for 60 ms or more.
Causes: • Defective development HVPS
Remedy: 1. Check the harness connection of the development HVPS. 2. Replace the development HVPS. 3. Replace the development unit.

Code: 323

Description: Development bias: high voltage error: Y. The high voltage error signal of the development unit is detected for 60 ms or more.
Causes: • Defective development HVPS
Remedy: 1. Check the harness connection of the development HVPS. 2. Replace the development HVPS. 3. Replace the development unit.

Code: 324

Description: Development motor error: K. The lock signal remained HIGH or LOW for longer than the prescribed time for the K, M, C, or Y, development motor.
Causes: • Disconnected harness from the development motor • Development motor shaft locked, blocked by obstruction • +24V off • Development motor defective
Remedy: 1. Check if the developer in the development unit is stuck. 2. Check the development motor operation with Output Check (SP5-804-162 to -165) after the development unit has been pulled out from the machine. 3. Check the harness connection of the development motor. 4. Remove the obstruction around the development motor shaft. 5. Check if the +24V at the motor connector is ON. If not, check the following: • Check if 24V is output from the PSU-EB. • Check all harness connections on the PSU-EB. • Replace the PSU-EB. 6. Replace the development motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie