Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SP5200SR — Trang 6/14

Code: 622

Description: Paper tray unit communication error
While the BICU communicates with an optional unit, an SC code is displayed if one of following conditions occurs. • The BICU receives the break signal which is generated by the peripherals only just after the main switch is turned on. • When the BICU does not receive an OK signal from a peripheral after sending a command to it.
Causes: • Harness disconnected or broken • BICU defective • External noise • Main board defective in the peripherals
Remedy:

Code: 623

Description: 2nd Paper tray unit communication error
While the BICU communicates with an optional unit, an SC code is displayed if one of following conditions occurs. • The BICU receives the break signal which is generated by the peripherals only just after the main switch is turned on. • When the BICU does not receive an OK signal from a peripheral after sending a command to it.
Causes: • Harness disconnected or broken • BICU defective • External noise • Main board defective in the peripherals
Remedy:

Code: 624

Description: 3rd Paper tray unit communication error
While the BICU communicates with an optional unit, an SC code is displayed if one of following conditions occurs. • The BICU receives the break signal which is generated by the peripherals only just after the main switch is turned on. • When the BICU does not receive an OK signal from a peripheral after sending a command to it.
Causes: • Harness disconnected or broken • BICU defective • External noise • Main board defective in the peripherals
Remedy:

Code: 641

Description: BICU control data transfer abnormal A sampling of the control data sent from the BCU reveals an abnormality.
Causes: • Controller board defective • External noise • BCU board defective
Remedy: Check the connection between the controller board and BICU. Replace the controller board. Replace the BICU.

Code: 652

Description: ID2 mismatching ID2 for @Remote certification is mismatching between the controller board and NVRAM.
Causes: • Used controller board installed • Used NVRAM installed
Remedy: Install the correct controller board or new controller board. Install the correct NVRAM or new NVRAM

Code: 653

Description: ID2 error ID2 stored in the NVRAM is incorrect.
Causes: • Used NVRAM installed
Remedy: Clear the ID2 in the NVRAM, and then input a correct ID2.

Code: 669

Description: EEPROM Communication Error The machine failed to detect a match between the read/write data for the EEPROM on the BICU after 3 attempts.
Causes: • EEPROM installed incorrectly • EEPROM defective. Turn the machine power off/on after replacing the EEPROM. • BICU defective.
Remedy:

Code: 671

Description: Engine board mismatch error Engine board and controller mismatch detected.
Causes: • Wrong engine board installed. • Wrong controller board installed. • Check the type of engine board and controller board.
Remedy: Replace the BICU. Replace the controller board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie