Description: RFID: Communication error Communication error occurs when the RFID board starts to communicate with the ID chip. Retry of RFID communication fails three times after the machine has detected the RFID communication error.
Causes: • Defective RFID board • Disconnected ASAP I/F • No memory chip on the AIO • Noise
Description: Memory address (PER) command error The BICU did not receive a memory address command from the controller with the prescribed time once the paper reached the registration sensor.
Causes: • Harness connection at BICU, Controller board loose or broken • Defective BICU • Defective Controller Board
Description: Print request (PRREQ) command error The BICU did not receive a print request command from the controller with the prescribed time once the paper reached the registration sensor.
Causes: • Harness connection at BICU, Controller board loose or broken • Defective BICU • Defective Controller Board
Remedy:
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.