Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SP5210SR — Trang 9/14

Code: 797

Description: Stack height lever solenoid error Stack height lever sensor does not turn on when the stack height lever solenoid turns off. • Paper jam message is displayed at 1st error detection. • SC is issued at 2nd error detection.
Causes: • Loose connection of the stack height lever solenoid • Defective stack height lever solenoid • Defective stack height lever sensor
Remedy:

Code: 816

Description: Energy saving I/O sub-system error The energy saving I/O sub-system detects an error.
Causes: • Controller board defective
Remedy: Replace the controller board.

Code: 817

Description: Boot loader error
Causes: The boot loader cannot read one of the following: Self-diagnostic module, kernel, or one of the files of the root file system, or the check of one of these items on the controller board failed.
Remedy: • File or module on the controller board is corrupted. • File or module on the controller board is illegal. • Replace the controller board

Code: 819

Description: Fatal kernel error Due to a control error, a RAM overflow occurred during system processing.
Causes: • Controller board defective • Insufficient memory • Expanded memory defective
Remedy:

Code: 820

Description: Self-diagnostics error: CPU Cut-in in ASIC occurs.
Causes: • Defective ASIC • Defective devices in which ASIC detects cut-in. • Damaged boot monitor program or self-diagnostic program
Remedy: Replace the controller board. Reinstall the boot monitor or self-diagnostic program.

Code: 833

Description: Self-diagnostic error 8: Engine I/F ASIC
Causes: [0F30] [0F31] ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the BICU. [0F41] ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the BICU. [50B1] Could not initialize or read the bus connection. Check for loose connections at the mother board. Replace the BICU. [50B2] Value of the SSCG register is incorrect. Check for loose connections at the mother board. Replace the BICU.
Remedy:

Code: 842

Description: Flash ROM verification error Verification error of the flash ROM on the controller board occurs. • This SC is logged at 1st error detection. • SC819 is issued at 2nd error detection.
Causes: • Defective flash ROM (controller board)
Remedy:

Code: 851

Description: IEEE 1394 I/F Abnormal IEEE1394 interface error.
Causes: • IEEE1394 interface board defective • Controller board defective
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie