Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC410DN — Trang 13/15

Code: 866

Description: SD card authentication error
A correct license is not found in the SD card.
Causes: SD-card data is corrupted.
Remedy: 1. Store correct data in the SD card.

Code: 867

Description: SD card error
The SD card for an application is ejected from the slot.
Causes: The SD card for an application is ejected from the slot.
Remedy: 1. Install the SD card.

Code: 868

Description: SD card access error [File system error, Device error]
SD card error occurs when SD card is activated.
Causes: Defective SD card. Defective SD card controller.
Remedy: 1. For a file system error, format the SD card on your PC. 2. For a device error, turn the mains switch off and on. 3. Replace the SD card. 4. Replace the controller.

Code: 870

Description: Address data error
An error is detected in theve SD data copied to the address book over a network.
Causes: Defective software program. Defective HDD. Incorrect path to the sever.
Remedy: 1. Initialize the address book data (SP5846-50). 2. Initialize the user information (format the hard disk with SP5832). 3. Replace the HDD.

Code: 872

Description: HDD mail data error
An error is detected in the mail receiving data area of the HDD at machine initialization.
Causes: Defective HDD. Power failure during an access to the HDD.
Remedy: 1. Initialize the HDD (SP5-832-001). 2. Replace the HDD.

Code: 873

Description: HDD mail transfer error
An error is detected in the mail transmitting data area of the HDD at machine initialization.
Causes: Defective HDD. Power failure during an access to the HDD.
Remedy: 1. Initialize the HDD (SP5-832-001). 2. Replace the HDD.

Code: 874

Description: Delete All error 1: HDD
An error is detected while the all data of the HDD or NVRAM are formatted physically by the Data Overwrite Security Unit (B735).
Causes: Not installed Data Overwrite Security Unit (SD card). Defective HDD.
Remedy: 1. Install the Data Overwrite Security Unit (B735). 2. Replace the HDD.

Code: 875

Description: Delete All error 2: Data area
An error is detected while the all data of the HDD or NVRAM are formatted logically by the Data Overwrite Security Unit (B735).
Causes: The logical format for HDD fails.
Remedy: 1. Turn the main switch off/on and try the operation again.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie