Causes: [0B00] [B] The write-&-verify check error has occurred in the ASIC. • Defective controller board 1. Replace the controller. ASIC not detected [0B06] [B] The ASIC of the I/O is not detected. • ASIC (controller board defective) • Poor connection between North Bridge and PCI I/F. 1. Replace controller board. SHM register check error [0B10] [B] Failed to initialize or could not read connection bus. Data in SHM register incorrect. • Defective bus connection • Defective SHM 1. Replace controller board Timer error between ASIC and CPU [0D05] [B] The CPU checks if the ASIC timer works properly compared with the CPU timer. • System firmware problem • Defective RAM-DIMM • Defective controller If the ASIC timer does not function in the specified range, this SC code is displayed. • Reinstall the controller system firmware. 1. Replace the RAM-DIMM. 2. Replace the controller board.
Description: Self-Diagnostic Error: HDD. Timeout error/ [3004]: Command error [3003] [B] When the main switch is turned on or starting the self-diagnostic, the HDD stays busy for the specified time or more.
Causes: MAC address check sum error [6101] [B] The result of the MAC address check sum does not match the check sum stored in ROM. • Defective controller 1. Replace the controller. PHY IC error [6104] [B] The PHY IC on the controller cannot be correctly recognized. Same as SC823-[6101] PHY IC loop-back error [6105] [B] An error occurred during the loop-back test for the PHY IC on the controller.
Remedy:
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.