Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC811DN — Trang 18/23

Code: 761

Description: Finisher folder plate motor error
The folder plate moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Folder plate HP sensor disconnected, defective • Folder plate motor disconnected, defective • Folder plate motor overloaded due to obstruction.
Remedy: 1. Check the connections and cables for the folder plate motor and HP sensor. 2. Check for blockages in the folder plate motor mechanism. 3. Replace the folder plate HP sensor and/or folder plate motor 4. Replace the finisher main board.

Code: 763

Description: Punch movement motor error
The punch unit moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the punch movement motor. 2. Defective punch movement motor

Code: 764

Description: Paper position sensor slide motor error
The paper position sensor moves but is not detected at the home position within the specified time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code.
Causes: • Motor harness disconnected, loose, defective • Defective motor
Remedy: 1. Check the connections to the paper position sensor slide motor. 2. Defective paper position sensor slide motor.

Code: 791

Description: Bridge unit error
The machine recognizes the finisher, but does not recognize the bridge unit.
Causes: • Defective connector • Broken harness
Remedy: 1. Check the connections between the bridge unit and the machine. 2. Install a new bridge unit.

Code: 792

Description: Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
Causes: • Defective connector • Defective harness • Incorrect installation
Remedy: 1. Check the connections between the finisher and the machine. 2. Install a new finisher.

Code: 818

Description: Watch-dog error
While the system program is running, other processes do not operate at all.
Causes: • Defective controller • Software error
Remedy: 1. Replace the controller.

Code: 819

Description: Fatal error
Causes: [696E] Process error System completely down • Defective RAM DIMM • Defective controller • Software error 1. Check and/or replace the RAM DIMM. 2. Replace the controller. • See Note 1 at the end of the SC table [766D] Memory error Unexpected system memory size • Defective RAM DIMM • Defective controller • Software error 1. Check and/or replace the RAM DIMM. 2. Replace the controller. [4361] Kernel stop error The cache error trap occurs in the CPU. • CPU cache error 1. Replace the controller. - Kernel stop error An error in the operation system (An error message is output.) • Defective CPU • Defective memory • Defective flash memory • Incorrect software
Remedy: 1. Replace the memory. 2. Replace the controller.

Code: 820

Description: Self-diagnostics error: CPU [XXXX]: Detailed error code
Causes: [0001] to [06FF] [0801] to [4005] CPU error During the self-diagnostic, the controller CPU detects an error. There are 47 types of error code (0001 to 4005) depending on the cause of the error. The CPU detects an error and displays the specific error code with the program address where the error occurs. • System firmware problem • Defective controller 1. Turn the main switch off and on. 2. Reinstall the controller system firmware. 3. Replace the controller. When the problem cannot be fixed with the above procedure, the following information displayed on the screen needs to be fed back to a technical support center. • SC code • Detailed error code • Program address [0702] CPU/Memory Error [0709] [070A] • System firmware problem • Defective RAM-DIMM • Defective controller 1. Reinstall the controller system software. 2. Replace the RAM-DIMM. 3. Replace the controller.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie