Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC821DN — Trang 14/22

Code: 623

Description: Optional paper feed unit communication error
In the case of installing two optional paper feed units (G832 + B800, G832 + B801, or G832 + G832): • The upper unit cannot communicate with the lower unit after the upper unit has detected the lower unit. • The upper unit detects an error signal from the lower unit after the upper unit has detected the lower unit.
Causes: • Disconnected connector
Remedy: Check and/ or connect the connector.

Code: 636-01

Description: SD Card Error. Expanded authentication module error There is no expanded authentication module in the machine. The SD card or the file of the expanded authentication module is broken. There is no DESS module in the machine.
Causes: • No expanded authentication module • Defective SD card • No DESS module
Remedy: 1. Install the expanded authentication module. 2. Install the SD card. 3. Install the DESS module.

Code: 641

Description: BICU control data transfer abnormal
A sampling of the control data sent from the BICU reveals an abnormality.
Causes: • Defective controller board • External noise • Defective BCU
Remedy: 1. Replace the controller board. 2. Replace the BCU.

Code: 669

Description: EEPROM error
Retry of EEPROM communication fails three times after the machine has detected the EEPROM error
Causes: • Caused by noise
Remedy: Turn the main power switch off and on.

Code: 670

Description: No response from controller at power on
When the main power is turned on or the machine starts warming up from energysaving mode, the controller does not receive a command signal from the controller
Causes: • Loose connection • Defective controller • Defective controller board
Remedy: 1. Check the connection between the BCU and controller. 2. Replace the controller. 3. Replace the BCU.

Code: 671

Description: Engine board mismatch error
Engine board and controller mismatch detected.
Causes: • Wrong engine board installed. • Wrong controller board installed. • Check the type of engine board and controller board.
Remedy: 1. Replace the BCU. 2. Replace the controller board.

Code: 681

Description: RFID: Communication error
• Communication error occurs when the RFID starts to communicate with the RFID receptor. • Retry of RFID communication fails three times after the machine has detected the RFID communication error.
Causes: • Defective RFID reader and writer • Disconnected ASAP I/F • No memory chip on the toner cartridge • Noise
Remedy: 1. Replace the RFID controller board. 2. Replace the toner cartridge.

Code: 682

Description: Memory chip at TD sensor: Communication error
Retry of memory chip communication fails three times after the machine has detected the memory chip communication error.
Causes: • Damaged memory chip data • Disconnected inter face • No memory chip on the development unit • Noise
Remedy: Replace the PCU.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie