Description: Delete All error 1: HDD An error is detected while all of the HDD or NVRAM are formatted physically by the Data Overwrite Security Unit (D377).
Causes: • Data Overwrite Security Unit (SD card) not installed • Defective HDD
Remedy: 1. Install the Data Overwrite Security Unit (M354). 2. Replace the HDD.
Description: Delete All error 2: Data area An error is detected while all of the HDD or NVRAM are formatted logically by the Data Overwrite Security Unit (D377).
Causes: • The logical format for the HDD fails.
Remedy: Turn the main switch off/on and try the operation again
Description: Log Data Error An error was detected in the handling of the log data at power on or during machine operation. This can be caused by switching the machine off while it is operating.
Causes: -001 Log Data Error 1 • Damaged log data file in the HDD Initialize the HDD with SP5832-004. -002 Log Data Error 2 • An encryption module not installed 1. Install the DESS module. 2. Disable the log encryption setting with the user tool. -003 Log Data Error 3 • Invalid log encryption key due to defective NVRAM data 1. Initialize the HDD with SP5832-004. 2. Disable the log encryption setting with he user tool. -004 Log Data Error 4 • Unusual log encryption function due to defective NVRAM data Initialize the HDD with SP5832-004. -005 Log Data Error 5 • Installed NVRAM or HDD which is used in another machine 1. Reinstall the previous NVRAM or HDD. 2. Initialize the HDD with SP5832-004. -099 Log Data Error 99 • Other than the above causes Ask your supervisor.
Description: HDD Data Overwrite Security SD card error The 'all delete' function cannot be executed but the Data Overwrite Security Unit (D377) is installed and activated.