Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio SPC821DN — Trang 10/22

Code: 531

Description: Ventilation fan (at the left side of the machine) motor-front/rear error
The IOB does not receive the lock signal for 2 seconds after turning on the ventilation fan motor-front/rear.
Causes: • Defective ventilation fan motor-front or rear
Remedy: 1. Replace the ventilation fan (at the left side of the machine) motor-front or rear. 2. Replace the IOB.

Code: 532

Description: IH coil fan error
The machine does not detect the fan motor lock signal for 2 seconds while the IH coil fan turns on.
Causes: • Disconnected harness • Overload on the IH coil fan motor • Defective IH coil fan motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the IH coil fan. 3. Replace the IOB.

Code: 533

Description: IH inverter fan error
The machine does not detect the fan motor lock signal for 2 seconds while the IH inverter fan turns on.
Causes: • Disconnected harness • Overload on the IH inverter fan motor • Defective IH inverter fan motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the IH inverter fan. 3. Replace the IOB.

Code: 534

Description: Second duct fan error
The machine does not detect the fan motor lock signal for 2 seconds while the second duct fan turns on.
Causes: • Disconnected harness • Overload on the second duct fan motor • Defective second duct motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the second duct fan. 3. Replace the IOB.

Code: 535

Description: Paper exit fan error
The machine does not detect the fan motor lock signal for 2 seconds while the paper exit fan turns on.
Causes: • Disconnected harness • Overload on the paper exit fan motor • Defective paper exit motor • Defective IOB
Remedy: 1. Check or replace the harness. 2. Replace the paper exit fan. 3. Replace the IOB.

Code: 536

Description: Third duct fan error
The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected.
Causes: • Defective controller fan motor
Remedy: 1. Replace the controller fan motor. 2. Replace the IOB.

Code: 540

Description: Fusing/Paper exit motor error
The IOB does not receive the lock signal 10 seconds after turning on the fusing/ paper exit motor.
Causes: • Motor overload • Defective fusing/paper exit motor
Remedy: 1. Check the motor operation with SP5804-031 to -036. Replace the 24V fuse on the PSU if fusing/paper exit motor does not operate. 2. Replace the fusing/paper exit motor.

Code: 541

Description: Heating roller thermopile error
The temperature measured by the heating roller thermopile does not reach 0°C for 6 seconds
Causes: • Loose connection of the heating roller thermopile • Defective heating roller thermopile • Defective thermopile
Remedy: 1. Check if the heating roller thermopile is firmly connected. 2. Replace the heating roller thermopile.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie