Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B181 Aficio 3260C V-C1 — Trang 17/31

Code: SC505

Description: Tandem tray rear fence motor error
• The return sensor does not switch on within 10 sec. after the rear fence motor switches on. • The HP sensor does not switch on 10 sec. after the rear fence motor switches on. • The HP sensor and return sensor switch on at the same time.
Causes: • Rear fence motor defective or poor connection • Paper or other obstacle interfering with operation of the sensors • Paper or other obstacle trapped between tray and motor • Motor mechanical overload due to obstruction • Return sensor or HP sensor defective or dirty

Code: SC506

Description: Tandem tray back fence motor error
The back fence should be closed but the fence was not detected in the closed position within 500 ms. -or- The back fence should be open but the fence was not detected in the open within 500 ms.
Causes: • Paper loaded incorrectly • Back fence motor harness disconnected, loose, defective • Back fence motor defective • Paper blocking sensors • Paper stuck between tray and motor • Back fence close, back fence open sensor harnesses disconnected, loose, or defective. • Back fence close, back fence open sensor defective • Paper or other obstacle is interfering with movement of the fence

Code: SC510

Description: LCT tray error
• When the bottom plate is lifted, the upper limit sensor does not come on for 30 sec. • When the bottom plate is lowered, the lower limit sensor does not come on for 30 sec. • After lift begins, the upper limit sensor does not switch on before the pick-up solenoid switches on. • The paper end sensor switches on during lift and the upper limit sensor does not switch on for 2.5 s, and a message prompts user to reset paper.
Causes: • Tray lift motor harness, disconnected, loose, or defective • Tray lift motor defective • Lift sensor defective or disconnected • Pick-up solenoid defective or disconnected • Paper end sensor defective

Code: SC515

Description: Duplex jogger motor error 1
When the jogger fence moves to the home position, the jogger fence HP sensor does not switch on even after the jogger motor has moved the jogger fence 153.5 mm.
Causes: • Rear fence motor defective or poor connection • Paper or other obstacle interfering with operation of the sensors or motor • Return sensor or HP sensor defective or dirty

Code: SC516

Description: Duplex jogger motor error 2
When the jogger fence moves from the home position, the jogger fence HP sensor does not turn off even if the jogger motor has moved the jogger fence 153.5 mm.
Causes: • Paper or other obstacle has jammed mechanism • HP sensor connector disconnected or defective • HP sensor defective

Code: SC530

Description: Fan error 1: fusing fan motor
The BCU does not receive the lock signal 5 seconds after the fusing unit fan switches on.
Causes: • Fusing unit cooling fan disconnected, defective • BCU defective

Code: SC531

Description: Fan error 2: fusing fan motor
The lock signal remained HIGH for 5 sec. while the fan at the front of the fusing unit near the heat dissipation fins was operating.
Causes: • Motor overload due to obstacle interfering with operation of the fan • Fan harness loose, disconnected, defective • Fan defective

Code: SC532

Description: Fan error 3: PCB box fan
The lock signal remained HIGH for 5 sec. while the fan that cools the printed circuit boards was operating.
Causes: • Motor overload due to obstacle interfering with operation of the fan • Fan harness loose, disconnected, defective • Fan defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie