Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh B205 Aficio 3025 R-C4 — Trang 15/17

Code: 872

Description: HDD mail RX data abnormal
An error was detected at power on. The data received during mail receive could be neither read nor written.
Causes: • HDD sector corrupted. Reformat with SP5832 007. • If this does not repair the problem, replace the HDD.

Code: 873

Description: HDD mail TX data error
An error was detected on the HDD immediately after the machine was turned on, or power was turned off while the machine used the HDD.
Causes: • Do SP5832-007 (Format HDD - Mail TX Data) to initialize the HDD. • Replace the HDD

Code: 874

Description: Delete All error 1: HDD
A data error was detected for the HDD/NVRAM after the Delete All option was used. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card.
Causes: • Turn the main switch off/on, and try the operation again. • Install the Data Overwrite Security Unit again.

Code: 875

Description: Delete All error 2: Data area
An error occurred while the machine deleted data from the HDD. Note: The source of this error is the Data Overwrite Security Unit B660 running from an SD card.
Causes: • Turn the main switch off/on, and try the operation again.

Code: 876

Description: Log data abnormal
An error was detected in the handling of the log data at power on or during machine operation. This can be caused if you turn the machine off while it is operating.
Causes: • Software error. Update the firmware • NVRAM defective • HDD defective

Code: 880

Description: File format converter error
A request for access to the File Format Converter (MLB) was not answered within the specified time.
Causes: • File format converter disconnected • File format converter board defective

Code: 901

Description: Electronic total counter error
The value of the total counter has already exceeded 9999999
Causes: • Replace the NVRAM on the controller board

Code: 920

Description: Printer Error 1
An internal application error was detected and operation cannot continue.
Causes: • Software defective • Insufficient memory
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie